INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA (RATIFICATION AND ENFORCEMENT) ACT

INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA (RATlFICATION AND ENFORCEMENT) ACT

ARRANGEMENT OF SECTIONS

SECTION

1. The enforcement of the International Convention for the Safety of Life at Sea in Nigeria.

2. Citation.

SCHEDULE

INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA (RATlFICATION AND ENFORCEMENT) ACT

An Act to enable effect to be given in the Federal Republic of Nigeria to the Interna‐ tional Convention for the Safety of Life at Sea 1974 as amended; and for related purposes.

[Commencement. ]

WHEREAS the Federal Republic of Nigeria acceded to the International Convention for the Safety of Life at Sea 1974 in May 1981;

AND WHEREAS the Federal Republic of Nigeria acceded to 1978 Protocol and the subsequent amendments to the International Convention for the safety of life at sea up to December 2002;

AND WHEREAS it is necessary and expedient to make legislative provisions for the en‐ forcement in the Federal Republic of Nigeria of the said International Convention for the Safety of Life at Sea, 1974, as amended.

1. The enforcement of the International Convention for the Safety of Life at Sea in Nigeria

As from the commencement of this Act, the provisions of the International Conven‐ tion for the Safety of Life at Sea, 1974, as amended, as set out in the Schedule to this Act, respectively shall, subject as thereunder provided, have the force of law in Nigeria, be given full recognition and effect and be applied by all authorities and persons exercising legislative, executive and judicial powers in Nigeria.

2. Citation

This Act may be cited as the International Convention for the Safety of Life at Sea (Ratification and Enforcement) Act, 2004.

SCHEDULE

[Section 1.]

INTERNATIONAL CODE FOR THE SECURITY OF SHIPS AND OF PORT FACILITIES (lSPS CODE)

(By virtue of the amendments to the annex to the International Convention for the Safety of Life at Sea, 1974, adopted by Resolution 1 of the Conference of Contracting Governments to the International Convention for the Safety of Life at Sea, 1974, on 12 December, 2002, the international Code for the Security of Ships and of Port Facilities is to be made mandatory under that Convention).

CODE INTERNATIONAL POUR LA SURETE DES NA VIRES ET DES INSTALLA TIONS PORTUAIRES (CODE ISPS)

(En vertu des amendements a I’ Annexe a la Convention Internationals de 1974 pour la sauva‐ garde de la vie humaine en mer, adoptes par la resolution 1 de la Conference des Gouverne‐ ments contractants a la Convention Internationale de 1974 pour la sauvegards de la vie hu‐ maine en mer le 12 decembre 2002, le Code international pour la surete des navires et des installations portuaires est obligatoire en vertu de cetta Convention).

CODIGO INTERNACIONAL PARA LA PROTECCION DE LOS BUQUES Y DE LAS INSTALACIONES PORTUARIAS (CODIGO PBIP)

(En virtud de las enmiendas al anexo del Convenio internacional para la seguridad de la vida humana en el mar, 1974, adoptadas el 12 de diciembre de 2002 rnediante la resolucion 1 de la Coferencia de los Gobiernos Contratantes del Convenio internacional para la saguridad de la vida humana an el mar, 1974, el C6digo internacional para la protecci6n de los buques y

de las instalaciones portuarias sera de obligado cumplimiento de onforrnidad con dicho Convenio).

RESOLUTION 2 OF THE CONFERENCE OF CONTRACTING GOVERNMENTS TO THE INTERN A TIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974

(adopted on 12 December 2002)

THE INTERNATIONAL CODE FOR THE SECURITY OF SHIPS AND OF

PORT FACILITIES

THE CONFERENCE,

HAVING ADOPTED amendments to the International Convention for the Safety of Life at Sea, 1974, as amended (hereinafter referred to as “the Convention”), concerning special measures to enhance maritime safety and security,

CONSIDERING that the new Chapter XI‐2 of the Convention makes a reference to an In‐ ternational Ship and Port Facility Security (ISPS) Code and requires ships, companies and

port facilities to comply with the relevant requirements of Part A of the International Ship and Port Facility Security (ISPS) Code, as specified in Part A of the ISPS Code,

BEING OF THE OPINION that the implementation by Contracting Governments of the said Chapter will greatly contribute to the enhancement of maritime safety and security and safe‐ guarding those on board and ashore,

HA VING CONSIDERED a draft of the International Code for the Security of Ships and of Port Facilities prepared by the Maritime Safety Committee of the International Maritime Or‐ ganisation (hereinafter referred to as “the Organisation”), at its seventy‐fifth and seventy‐sixth sessions, for consideration and adoption by the Conference,

1. ADOPTS the International Code for the Security of Ships and of Port Facilities (hereinafter referred to as “the Code”), the text of which is set out in the annex to the present resolution;

2. INVITES Contracting Governments to the Convention to note that the Code will take effect on 1 July 2004 upon entry into force of the new Chapter XI‐2 of the Convention;

3. REQUESTS the Maritime Safety Committee to keep the Code under review and amend it, as appropriate;

4. REQUESTS the Secretary‐General of the Organisation to transmit certified copies of the present resolution and the text of the Code contained in the annex to all Contracting Governments to the Convention;

5. FURTHER REQUESTS the Secretary‐General to transmit copies of this reso‐ lution and its annex to all members of the Organisation which are not Contract‐ ing Governments to the Convention.

ANNEX

INTERNATIONAL CODE FOR THE SECURITY OF SHIPS AND OF PORT FACILITIES

Preamble

1. The Diplomatic Conference on Maritime Security held in London in December 2002 adopted new provisions in the International Convention for the Safety of Life at Sea, 1974 and this Code to enhance maritime security. These new requirements form the international framework through which ships and port facilities can co‐operate to detect and deter acts which threaten security in the maritime transport sector.

2. Following the tragic events of 11th September 2001, the twenty‐second session of the Assembly of the International Maritime Organisation (“the Organisation”), in November 2001, unanimously agreed to the development of new measures relating to the security of ships and of port facilities for adoption by a Conference of Contracting Governments to the International Convention for the Safety of Life at Sea, 1974 (known as the Diplomatic Con‐ ference on Maritime Security) in December 2002. Preparation for the Diplomatic Conference was entrusted to the Organisation’s Maritime Safety Committee (MSC) on the basis of sub‐ missions made by Member States, intergovernmental organisations and non‐governmental organisations in consultative status with the Organisation.

3. The MSC, at its first extraordinary session, held also in November 2001, in order to accel‐ erate the development and the adoption of the appropriate security measures, established an MSC Intersessional Working Group on Maritime Security. The first meeting of the MSC In‐ tersessional Working Group on Maritime Security was held in February 2002 and the outcome of its discussions was reported to, and considered by, the seventy‐fifth session of the MSC in May 2002, when an ad hoc Working Group was established to further develop the proposals made. The seventy‐fifth session of the MSC considered the report of that Working Group and recommended that work should be taken forward through a further MSC Intersessional Work‐ ing Group, which was held in September 2002. The seventy‐sixth session of the MSC consid‐ ered the outcome of the September 2002 session of the MSC Intersessional Working Group and the further work undertaken by the MSC Working Group held in conjunction with the Committee’s seventy‐sixth session in December 2002, immediately prior to the Diplomatic Conference, and agreed the final version of the proposed texts to be considered by the Diplo‐ matic Conference.

4. The Diplomatic Conference (9 to 13 December 2002) also adopted amendments to the existing provisions of the International Convention for the Safety of Life at Sea, 1974 (SOLAS 74) accelerating the implementation of the requirement to fit Automatic Identifica‐ tion Systems and adopted new regulations in Chapter XI‐1 of SOLAS 74 covering marking of the Ship Identification Number and the carriage of a Continuous Synopsis Record. The Diplomatic Conference also adopted a number of Conference resolutions, including those cover‐ ing implementation and revision of this Code, technical co‐operation, and co‐operative work with the International Labour Organisation and World Customs Organisation. It was recog‐ nised that review and amendment of certain of the new provisions regarding maritime security may be required on completion of the work of these two Organisations.

5. The provisions of Chapter XI‐2 of SOLAS 74 and this Code apply to ships and to port facilities. The extension of SOLAS 74 to cover port facilities was agreed on the basis that SOLAS 74 offered the speediest means of ensuring the necessary security measures entered into force and given effect quickly. However, it was further agreed that the provisions relating to port facilities should relate solely to the ship/port interface. The wider issue of the security of port areas will be the subject of further joint work between the International Maritime Or‐ ganisation and the International Labour Organisation. It was also agreed that the provisions should not extend to the actual response to attacks or to any necessary clear‐up activities after such an attack.

6. In drafting the provision, care has been taken to ensure compatibility with the provisions of the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers, 1978, as amended, the International Safety Management (ISM) Code and the har‐ monised system of survey and certification.

7. The provisions represent a significant change in the approach of the international maritime industries to the issue of security in the maritime transport sector. It is recognised that they may place a significant additional burden on certain Contracting Governments. The impor‐ tance of technical co‐operation to assist Contracting Governments implement the provisions is fully recognised.

8. Implementation of the provisions will require continuing effective co‐operation and under‐ standing between all those involved with, or using, ships and port facilities, including ship’s personnel, port personnel, passengers, cargo interests, ship and port management and those in National and Local Authorities with security responsibilities. Existing practices and proce‐

dures will have to be reviewed and changed if they do not provide an adequate level of secu‐ rity. In the interests of enhanced maritime security, additional responsibilities will have to be carried by the shipping and port industries and by National and Local Authorities.

9. The guidance given in Part B of this Code should be taken into account when implement‐ ing the security provisions set out in Chapter XI‐2 of SOLAS 74 and in Part A of this Code. However, it is recognised that the extent to which the guidance applies may vary depending on the nature of the port facility and ofthe ship, its trade and/or cargo.

10. Nothing in this Code shall be interpreted or applied in a manner inconsistent with the proper respect of fundamental rights and freedoms as set out in international instruments, par‐ ticularly those relating to maritime workers and refugees, including the International Labour Organisation Declaration of Fundamental Principles and Rights at Work as well as interna‐ tional standards concerning maritime and port workers.

11. Recognising that the Convention on the Facilitation of Maritime Traffic, 1965, as amended, provides that foreign crew members shall be allowed ashore by the public authori‐ ties while the ship on which they arrive is in port, provided that the formalities on arrival of the ship have been fulfilled and the public authorities have no reason to refine permission to come ashore for reasons of public health, public safety or public order, Contracting Govern‐ ments, when approving ship and port facility security plans, should pay due cognisance to the fact that ship’s personnel live and work on the vessel and need shore leave and access to shore‐based seafarer welfare facilities, including medical care.

PART A

Mandatory Requirements regarding the Provisions of Chapter XI‐2 of the Annex to the International Convention for the Safety of Life at Sea, 1974, as amended

1. General

1.1 Introduction

This Part of the International Code for the Security of Ships and of Port Facilities con‐ tains mandatory provisions to which reference is made in Chapter XI‐2 of the International Convention for the Safety of Life at Sea, 1974, as amended.

1.2 Objectives

The objectives of this Code are:

.1 to establish an international framework involving co‐operation between Con‐ tracting Governments, Government agencies, local administrations and the shipping and port industries to detect security threats and take preventive measures against security incidents affecting ships or port facilities used in in‐ ternational trade;

.2 to establish the respective roles and responsibilities of the Contracting Gov‐ ernments, Government agencies, local administrations and the shipping and port industries, at the national and international level, for ensuring maritime security;

.3 to ensure the early and efficient collection and exchange of security‐related information;

.4 to provide a methodology for security assessments so as to have in place plans and procedures to react to changing security levels; and

.5 to ensure confidence that adequate and proportionate maritime security measures are in place.

1.3 Functional requirements

In order to achieve its objectives, this Code embodies a number of functional require‐ ments. These include, but are not limited to‐‐

.1 gathering and assessing information with respect to security threats and ex‐ changing such information with appropriate Contracting Governments;

.2 requiring the maintenance of communication protocols for ships and port facilities;

.3 preventing unauthorised access to ships, port facilities and their restricted areas;

.4 preventing the introduction of unauthorised weapons, incendiary devices or explosives to ships or port facilities;

.5 providing means for raising the alarm in reaction to security threats or security incidents;

.6 requiring ship and port facility security plans based upon security assessments; and

.7 requiring training, drills and exercises to ensure familiarity with security plans and procedures.

2. Definitions

2.1 For the purpose of this Part, unless expressly provided otherwise‐

.1 “Convention” means the International Convention for the Safety of Life at Sea,1974 as amended

.2 “Regulation” means a regulation of the Convention;

.3 “Chapter” means a chapter of the Convention;

.4 “Ship security plan” means a plan developed to ensure the application of measures on board the ship designed to protect persons on board, cargo, cargo

transport units, ship’s stores or the ship from the risks of a security incident;

.5 “Port facility security plan” means a plan developed to ensure the application of measures designed to protect the port facility and ships, persons, cargo, cargo transport units and ship’s stores within the port facility from the risks of a security incident;

.6 “Ship security officer” means the person on board the ship, accountable to the master, designated by the Company as responsible for the security of the ship, including implementation and maintenance of the ship security plan, and for li‐ aison with the company security officer and port facility security officers;

.7 “Company security officer” means the person designated by the Company for ensuring that a ship security assessment is carried out; that a ship security plan is developed, submitted for approval, and thereafter implemented and main‐ tained, and for liaison with port facility security officers and the ship security officer;

.8 “Port facility security officer” means the person designated as responsible for the development, implementation, revision and maintenance of the port facility security plan and for liaison with the ship security officers and company secu‐ rity officers;

.9 “Security level 1” means the level for which minimum appropriate protective security measures shall be maintained at all times;

.10 “Security level 2” means the level for which appropriate additional protective security measures shall be maintained for a period of time as a result of height‐ ened risk of a security incident;

.11 “Security level 3” means the level for which further specific protective secu‐ rity measures shall be maintained for a limited period of time when a security incident is probable or imminent, although it may not be possible to identify the specific target.

2.2 The term “ship”, when used in this Code, includes mobile offshore drilling units and high‐speed craft as defined in regulation XI‐2/1.

2.3 The term “Contacting Government” in connection with any reference to a port fa‐ cility, when used in sections 14 to 18, includes a reference to the Designated Authority.

2.4 Terms not otherwise defined in this Part shall have the same meaning as the mean‐ ing attributed to them in Chapters 1 and XI‐2.

3. Application

3.1 This Code applies to−

.1 the following types of ships engaged on international voyages−

1. passenger ships, including high‐speed passenger craft;

.2 cargo ships, including high‐speed craft, of 500 gross tonnage and upwards;

and

.3 mobile offshore drilling units; and

.2 port facilities serving such ships engaged on international voyages.

3.2 Notwithstanding the provisions of section 3.1.2, Contracting Governments shall de‐ cide the extent of application of this Part of the Code to those port facilities within their terri‐ tory which, although used primarily by ships not engaged on international voyages, are re‐ quired, occasionally, to serve ships arriving or departing on an international voyage.

3.2.1 Contracting Governments shall base their decisions, under section 3.2, on a port facility security assessment carried out in accordance with this Part of the Code.

3.2.2 Any decision which a Contracting Government makes, under section 3.2,

shall not compromise the level of security intended to be achieved by Chapter XI‐2 or by this Part of the Code.

3.3This Code does not apply to warships, naval auxiliaries or other ships owned or op‐ erated by a Contracting Government and used only on Government non‐commercial service.

3.4Sections 5 to 13 and 19 of this Part apply to Companies and ships as specified in regulation XI‐2/4.

3.5Sections 5 and 14 to 18 of this Part apply to port facilities as specified in regula‐ tion XI‐2/10.

3.6Nothing in this Code shall prejudice the rights or obligations of States under interna‐ tionallaw.

4. Responsibilities of Contracting Governments

4.1 Subject to the provisions of regulation XI‐2/3 and XI‐2/7, contracting Governments shall set security levels and provide guidance for protection from security incidents. Higher security levels indicate greater likelihood of occurrence of a security incident. Factors to be considered in setting the appropriate security level include‐

.1 the degree that the threat inflation is credible;

.2 the degree that the threat information is corroborated;

.3 the degree that the threat information is specific or imminent; and

.4 the potential consequences of such a security incident.

4.2 Contracting Governments, when they set security level 3, shall issue, as necessary, appropriate instructions and shall provide security‐related information to the ships and port facilities that may be affected.

4.3 Contracting Governments may delegate to a recognised security organisation certain of their security‐related duties under Chapter XI‐2 and this Part of the Code with the excep‐ tion of‐

.1 setting of the applicable security level;

.2 approving a port facility security assessment and subsequent amendments to an approved assessment;

.3 determining the port facilities which will be required to designate a port facility security officer;

.4 approving a port facility security plan and subsequent amendments to an ap‐ proved plan;

.5 exercising control and compliance measures pursuant to regulation XI‐2/9; and

.6 establishing the requirements for a Declaration of Security.

4.4 Contracting Governments shall, to the extent they consider appropriate, test the ef‐ fectiveness of the ship security plans or the port facility security plans, or of amendments to such plans, they have approved, or, in the case of ships, of plans which have been approved on their behalf.

5. Declaration of Security

5.1 Contracting Governments shall determine when a Declaration of Security is required by assessing the risk the ship/port interface or ship‐to‐ship activity poses to persons, property or the environment.

5.2 A ship can request completion ofa Declaration of Security when‐

.1 the ship is operating at a higher security level than the port facility or another ship it is interfacing with;

.2 there is an agreement on a Declaration of Security between Contracting Gov‐ernments covering certain international voyages or specific ships on those

voyages;

.3 there has been a security threat or a security incident involving the ship or in‐ volving the port facility, as applicable;

.4 the ship is at a port which is not required to have and implement an approved port facility security plan; or

.5 the ship is conducting ship‐to‐ship activities with another ship not required to have and implement an approved ship security plan.

5.3 Requests for the completion of a Declaration of Security, under this section, shall be acknowledged by the applicable port facility or ship.

5.4 The Declaration of Security shall be completed by‐

.1 the master or the ship security officer on behalf of the ship(s); and, if appropriate;

.2 the port facility security officer or, if the Contracting Government determines otherwise, by any other body responsible for shore‐side security, on behalf of the port facility.

5.5 The Declaration of Security shall address the security requirements that could be shared between a port facility and a ship (or between ships) and shall state the responsibility for each.

5.6 Contracting Governments shall specify, bearing in mind the provisions of regula‐ tion XI‐2/9.2.3, the minimum period for which Declarations of Security shall be kept by the port facilities located within their territory.

5.7 Administrations shall specify, bearing in mind the provisions of regulation XI‐2/9.2.3, the minimum period for which Declarations of Security shall be kept by ships entitled to fly their flag.

6. Obligations of the Company

6.1 The Company shall ensure that the ship security plan contains a clear statement em‐ phasising the master’s authority. The Company shall establish in the ship security plan that the master has the overriding authority and responsibility to make decisions with respect to the safety and security of the ship and to request the assistance of the Company or of any Con‐ tracting Government as may be necessary.

6.2 The Company shall ensure that the company security officer, the master and the ship security officer are given the necessary support to fulfil their duties and responsibilities in accordance with Chapter XI‐2 and this Part of the Code.

7. Ship Security

7.1 A ship is required to act upon the security levels set by Contracting Governments as set out below.

7.2 At security level I, the following activities shall be carried out, through appropriate measures, on all ships, taking into account the guidance given in Part B of this Code, in order to identify and take preventive measures against security incidents‐

.1 ensuring the performance of all ship security duties;

.2 controlling access to the ship;

.3 controlling the embarkation of persons and their effects;

.4 monitoring restricted areas to ensure that only authorised persons have access;

.5 monitoring of deck areas and areas surrounding the ship;

.6 supervising the handling of cargo and ship’s stores; and

.7 ensuring that security communication is readily available.

7.3 At security level 2, additional protective measures, specified in the ship security plan, shall be implemented for each activity detailed in section 7.2, taking into account the guidance given in Part B of this Code.

7.4 At security level 3, further specific protective measures, specified in the ship secu‐

rity plan, shall be implemented for each activity detailed in section 7.2, taking into account the guidance given in Part B of this Code.

7.5 Whenever security level 2 or 3 is set by the Administration, the ship shall acknowl‐ edge receipt of the instructions on change of the security level.

7.6 Prior to entering a port or whilst in a port within the territory of a Contracting Gov‐ ernment that has set security level 2 or 3, the ship shall acknowledge receipt of this instruction and shall confirm to the port facility security officer the initiation of the implementation of the

appropriate measures and procedures as detailed in the ship security plan, and in the case of security level 3, in instructions issued by the Contracting Government which has set security level 3. The ship shall report any difficulties in implementation. In such cases, the port facility security officer and ship security officer shall liaise and co‐ordinate the appropriate actions.

7.7 If a ship is required by the Administration to set, or is already at, a higher security level than that set for the port it intends to enter or in which it is already located, then the ship shall advise, without delay, the competent authority of the Contracting Government within whose territory the port facility is located and the port facility security officer of the situation.

7.7.1 In such cases, the ship security officer shall liaise wit the port facility security officer and co‐ordinate appropriate actions, if necessary.

7.8 An Administration requiring ships entitled to fly its flag to set security level 2 or 3 in

a port of another Contracting Government shall inform that Contracting Government without delay.

7.9 When Contracting Governments set security levels and ensure the provision of secu‐ rity‐level information to ships operating in their territorial sea, or having communicated an intention to enter their territorial sea, such ships shall be advised to maintain vigilance and report immediately to their Administration and any nearby coastal States any information that comes to their attention that might affect maritime security in the area.

7.9.1 When advising such ships of the applicable security level, a Contracting Gov‐ ernment shall, taking into account the guidance given in Part B of this Code, also advise those ships of any security measure that they should take and, if appropriate, of measures that have been taken by the Contracting Government to provide protection against the threat.

8. Ship Security Assessment

8.1 The ship security assessment is an essential and integral part of the process of devel‐ oping and updating the ship security plan.

8.2 The company security officer shall ensure that the ship security assessment is carried out by persons with appropriate skills to evaluate the security of a ship, in accordance with this section, taking into account the guidance given in Part B of this Code.

8.3 Subject to the provisions of section 9.2.1, a recognised security organisation may carry out the ship security assessment of a specific ship.

8.4 The ship security assessment shall include an on‐scene security survey and, at least, the following elements‐

.1 identification of existing security measures, procedures and operations;

.2 identification and evaluation of key shipboard operations that it is important to protect;

.3 identification of possible threats to the key shipboard operations and the likeli‐ hood of their occurrence, in order to establish and prioritise security measures; and

.4 identification of weaknesses, including human factors, in the infrastructure, policies and procedures.

8.5 The ship security assessment shall be documented, reviewed, accepted and retained by the Company.

9. Ship Security Plan

9.1 Each ship shall carry on board a ship security plan approved by the Administration.

The plan shall make provisions for the three security levels as defined in this Part of the Code.

9.1.1 Subject to the provisions of section 9.2.1, a recognised security organisation may prepare the ship security plan for a specific ship.

9.2 The Administration may entrust the review and approval of ship security plans, or of amendments to a previously approved plan, to recognised security organisations.

9.2.1 In such cases, the recognised security organisation undertaking the review and approval of a ship security plan, or its amendments, for a specific ship shall not have been involved in either the preparation of the ship security assessment or of the ship security plan, or of the amendments, under review.

9.3 The submission of a ship security plan, or of amendments to a previously approved plan, for approval shall be accompanied by the security assessment on the basis of which the plan, or the amendments, has been developed.

9.4 Such a plan shall be developed, taking into account the guidance given in Part B of this Code, and shall be written in the working language or languages of the ship. If the lan‐ guage or languages used is not English, French or Spanish, a translation into one of these lan‐ guages shall be included. The plan shall address, at least, the following‐

.1 measures designed to prevent weapons, dangerous substances and devices intended for use against persons, ships or ports and the carriage of which is not authorised from being taken on board the ship;

.2 identification of the restricted areas and measures for the prevention of unauthorised access to them;

.3 measures for the prevention of unauthorised access to the ship;

.4 procedures for responding to security threats or breaches of security, including provisions for maintaining critical operations of the ship or ship/port interface;

.5 procedures for responding to any security instructions Contracting Govern‐ ments may give at security level 3;

.6 procedures for evacuation in case of security threats or breaches of security;

.7 duties of shipboard personnel assigned security responsibilities and of other shipboard personnel on security aspects;

.8 procedures for auditing the security activities;

.9 procedures for training, drills and exercises associated with the plan;

.10 procedures for interfacing with port facility security activities;

.11 procedures for the periodic review of the plan and for updating;

.12 procedures for reporting security incidents;

.13 identification of the ship security officer;

.14 identification of the company security officer, including 24‐hour contact details;

.15 procedures to ensure the inspection, testing, calibration, and maintenance of any security equipment provided on board;

.16 frequency for testing or calibration of any security equipment provided on board;

.17 identification of the locations where the ship security alert system activation points are provided; and

.18 procedures, instructions and guidance on the use of the ship security alert sys‐ tem, including the testing, activation, deactivation and resetting and to limit false alerts.

9.4.1 Personnel conducting internal audits of the security activities specified in the plan or evaluating its implementation shall be independent of the activities being audited un‐ less this is impracticable due to the size and the nature of the Company or of the ship.

9.5 The Administration shall determine which changes to an approved ship security plan or to any security equipment specified in an approved plan shall not be implemented unless the relevant amendments to the plan are approved by the Administration. Any such changes shall be at least as effective as those measures prescribed in Chapter XI‐2 and this Part of the Code.

9.5.1 The nature of the changes to the ship security plan or the security equipment that have been specifically approved by the Administration, pursuant to section 9.5, shall be documented in a manner that clearly indicates such approval. This approval shall be available on board and shall be presented together with the International Ship Security Certificate (or the Interim International Ship Security Certificate). If these changes are temporary, once the original approved measures or equipment are reinstated, this documentation no longer needs to be retained by the ship.

9.6 The plan may be kept in an electronic format. In such a case, it shall be protected by procedures aimed at preventing its unauthorised deletion, destruction or amendment.

9.7 The plan shall be protected from unauthorised access or disclosure.

9.8 Ship security plans are not subject to inspection by officers duly authorised by a Contracting Government to carry out control and compliance measures in accordance with regulation XI‐2/9, save in circumstances specified in section 9.8.1.

9.8.1 If the officers duly authorised by a Contracting Government have clear grounds to believe that the ship is not in compliance with the requirements of Chapter XI‐2 or Part A of this Code, and the only means to verify or rectify the non‐compliance is to review the rele‐ vant requirements of the ship security plan, limited access to the specific sections of the plan relating to the non‐compliance is exceptionally allowed, but only with the consent of the Con‐ tracting Government of, or the master of, the ship concerned. Nevertheless, the provisions in the plan relating to section 9.4 subsections .2, .4, .5, .7, .15, .17 and .18 of this Part of the Code are considered as confidential information, and cannot be subject to inspection unless otherwise agreed by the Contracting Governments concerned.

10. Records

10.1 Records of the following activities addressed in the ship security plan shall be kept on board for at least the minimum period specified by the Administration, bearing in mind the provisions of regulation X 1‐2/9.2.3‐

.1 training, drills and exercises;

.2 security threats and security incidents;

.3 breaches of security;

.4 changes in security level;

.5 communications relating to the direct security of the ship such as specific threats to the ship or to port facilities the ship is, or has been, in;

.6 internal audits and reviews of security activities;

.7 periodic review of the ship security assessment;

.8 periodic review of the ship security plan;

.9 implementation of any amendments to the plan; and

.10 maintenance, calibration and testing of any security equipment provided on board, including testing of the ship security alert system.

10.2 The records shall be kept in the working language or languages of the ship. If the language or languages used are not English, French or Spanish, a translation into one of these languages shall be included.

10.3 The records may be kept in an electronic format. In such a case, they shall be pro‐

tected by procedures aimed at preventing their unauthorised deletion, destruction or amendment.

10.4 The records shall be protected from unauthorised access or disclosure.

11. Company Security Officer

11.1 The Company shall designate a company security officer. A person designated as the company security officer may act as the company security officer for one or more ships,

depending on the number or types of ships the Company operates, provided it is clearly identi‐ fied for which ships this person is responsible. A Company may, depending on the number or types of ships they operate, designate several persons as company security officers provided it is clearly identified for which ships each person is responsible.

11.2 In addition to those specified elsewhere in this Part of the Code, the duties and re‐ sponsibilities of the company security officer shall include, but are not limited to‐

.1 advising the level of threats likely to be encountered by the ship, using appropriate security assessments and other relevant information;

.2 ensuring that ship security assessments are carried out;

.3 ensuring the development, the submission for approval, and thereafter the im‐ plementation and maintenance of the ship security plan;

.4 ensuring that the ship security plan is modified, as appropriate, to correct defi‐ ciencies and satisfy the security requirements of the individual ship;

.5 arranging for internal audits and reviews of security activities;

.6 arranging for the initial and subsequent verifications of the ship by the Admini‐ stration or the recognised security organisation;

.7 ensuring that deficiencies and non‐conformities identified during internal audits, periodic reviews, security inspections and verifications of compliance are promptly addressed and dealt with;

.8 enhancing security awareness and vigilance;

.9 ensuring adequate training for personnel responsible for the security of the ship;

.10 ensuring effective communication and co‐operation between the ship security officer and the relevant port facility security officers;

.11 ensuring consistency between security requirements and safety requirements;

.12 ensuring that, if sister‐ship or fleet security plans are used, the plan for each ship reflects the ship‐specific information accurately; and

.13 ensuring that any alternative or equivalent arrangements approved for a particular ship or group of ships are implemented and maintained.

12. Ship Security Officer

12.1 A ship security officer shall be designated on each ship.

12.2 In addition to those specified elsewhere in this Part of the Code, the duties and re‐ sponsibilities of the ship security officer shall include, but are not limited to‐

.1 undertaking regular security inspections of the ship to ensure that appropriate security measures are maintained;

.2 maintaining and supervising the implementation of the ship security plan, including any amendments to the plan;

.3 co‐ordinating the security aspects of the handling of cargo and ship’s stores

with other shipboard personnel and with the relevant port facility security officers;

.4 proposing modifications to the ship security plan;

.5 reporting to the company security officer any deficiencies and non‐con‐ formities identified during internal audits, periodic reviews, security inspec‐ tions and verifications of compliance and implementing any corrective actions;

.6 enhancing security awareness and vigilance on board;

.7 ensuring that adequate training has been provided to shipboard personnel, as appropriate;

.8 reporting all security incidents;

.9 co‐ordinating implementation of the ship security plan with the company secu‐ rity officer and the relevant port facility security officer; and

.10 ensuring that security equipment is properly operated, tested, calibrated and maintained, if any.

13. Training, Drills and Exercises on Ship Security

13.1 The company security officer and appropriate shore‐based personnel shall have knowledge and have received training, taking into account the guidance given in Part B of this Code.

13.2 The ship security officer shall have knowledge and have received training, taking into account the guidance given in Part B of this Code.

13.3 Shipboard personnel having specific security duties and responsibilities shall un‐ derstand their responsibilities for ship security as described in the ship security plan and shall have sufficient knowledge and ability to perform their assigned duties, taking into account the guidance given in Part B of this Code.

13.4 To ensure the effective implementation of the ship security plan, drills shall be car‐ ried out at appropriate intervals taking into account the ship type, ship personnel changes, port facilities to be visited and other relevant circumstances, taking into account the guidance

given in Part B of this Code.

13.5 The company security officer shall ensure the effective co‐ordination and imple‐ mentation of ship security plans by participating in exercises at appropriate intervals, taking into account the guidance given in Part B of this Code.

14. Port Facility Security

14.1 A port facility is required to act upon the security levels set by the Contracting Government within whose territory it is located. Security measures and procedures shall be applied at the port facility in such a manner as to cause a minimum of interference with, or delay to, passengers, ship, ship’s personnel and visitors, goods and services.

14.2 At security level 1, the following activities shall be carried out through appropriate measures in all port facilities, taking into account the guidance given in Part B of this Code, in order to identity and take preventive measures against security incidents‐

.1 ensuring the performance of all port facility security duties;

.2 controlling access to the port facility;

.3 monitoring of the port facility, including anchoring and berthing area(s);

.4 monitoring restricted areas to ensure that only authorised persons have access;

.5 supervising the handling of cargo;

.6 supervising the handling of ship’s stores; and

.7 ensuring that security communication is readily available.

14.3 At security level 2, additional protective measures, specified in the port facility se‐ curity plan, shall be implemented for each activity detailed in section 14.2, taking into account the guidance given in Part B of this Code.

14.4 At security level 3, further specific protective measures, specified in the port facil‐ ity security plan, shall be implemented for each activity detailed in section 14.2, taking into account the guidance given in Part B of this Code.

14.4.1 In addition, at security level 3, port facilities are required to respond to and implement any security instructions given by the Contracting Government within whose terri‐ tory the port facility is located.

14.5 When a port facility security officer is advised that a ship encounters difficulties in complying with the requirements of Chapter XI‐2 or this Part or in implementing the appro‐ priate measures and procedures as detailed in the ship security plan, and in the case of security level 3 following any security instructions given by the Contracting Government within whose territory the port facility is located, the port facility security officer and the ship security offi‐ cer shall liaise and co‐ordinate appropriate actions.

14.6 When a port facility security officer is advised that a ship is at a security level which is higher than that of the port facility, the port facility security officer shall report the matter to the competent authority and shall liaise with the ship security officer and co‐ordinate appropriate actions, if necessary.

15. Port Facility Security Assessment

15.1 The port facility security assessment is an essential and integral part of the process of developing and updating the port facility security plan.

15.2 The port facility security assessment shall be carried out by the Contracting Gov‐ ernment within whose territory the port facility is located. A Contracting Government may authorise a recognised security organisation to carry out the port facility security assessment of a specific port facility located within its territory.

15.2.1 When the port facility security assessment has been carried out by a recognised security organisation, the security assessment shall be reviewed and approved for compliance with this section by the Contracting Government within whose territory the port facility is located.

15.3 The persons carrying out the assessment shall have appropriate skills to evaluate the security of the port facility in accordance with this section, taking into account the guid‐ ance given in Part B of this Code.

15.4 The port facility security assessments shall periodically be reviewed and updated, taking account of changing threats and/or minor changes in the port facility, and shall always be reviewed and updated when major changes to the port facility take place.

15.5 The port facility security assessment shall include, at least, the following elements‐

.1 identification and evaluation of important assets and infrastructure it is impor‐ tant to protect;

.2 identification of possible threats to the assets and infrastructure and the likeli‐ hood of their occurrence, in order to establish and prioritise security measures;

.3 identification, selection and prioritisation of countermeasures and procedural changes and their level of effectiveness in reducing vulnerability; and

.4 identification of weaknesses, including human factors, in the infrastructure, policies and procedures.

15.6 The Contracting Government may allow a port facility security assessment to cover more than one port facility if the operator, location, operation, equipment, and design of these port facilities are similar. Any Contracting Government which allows such an arrangement shall communicate to the organisation particulars thereof.

15.7 Upon completion of the port facility security assessment, a report shall be prepared, consisting of a summary of how the assessment was conducted, a description of each vulner‐ ability found during the assessment and a description of countermeasures that could be used to address each vulnerability. The report shall be protected from unauthorised access or disclosure.

16. Port Facility Security Plan

16. 1 A port facility security plan shall be developed and maintained, on the basis of a port facility security assessment for each port facility, adequate for the ship/port interface. The plan shall make provisions for the three security levels, as defined in this Part of the Code.

16.1.1 Subject to the provisions of section 16.2, a recognised security organisation may prepare the port facility security plan of a specific port facility.

16.2 The port facility security plan shall be approved by the Contracting Government in whose territory the port facility is located.

16.3 Such a plan shall be developed taking into account the guidance given in Part B of this Code and shall be in the working language of the port facility. The plan shall address, at least, the following‐

.1 measures designed to prevent weapons or any other dangerous substances and devices intended for use against persons, ships or ports, and the carriage of which is not authorised from being introduced into the port facility or on board a ship;

.2 measures designed to prevent unauthorised access to the port facility, to ships moored at the facility, and to restricted areas of the facility;

.3 procedures for responding to security threats or breaches of security, including provisions for maintaining critical operations of the port facility or ship/port interface;

.4 procedures for responding to any security instructions the Contracting Govern‐ ment in whose territory the port facility is located may give at security level 3;

.5 procedures for evacuation in case of security threats or breaches of security;

.6 duties of port facility personnel assigned security responsibilities and of other facility personnel on security aspects;

.7 procedures for interfacing with ship security activities;

.8 procedures for the periodic review of the plan and updating;

.9 procedures for reporting security incidents;

.10 identification of the port facility security officer including 24‐hour contact details;

.11 measures to ensure the security of the information contained in the plan;

.12 measures designed to ensure effective security of cargo and the cargo handling equipment at the port facility;

.13 procedures for auditing the port facility security plan;

.14 procedures for responding in case the ship security alert system of a ship at the port facility has been activated; and

.15 procedures for facilitating shore leave for ship’s personnel or personnel changes, as well as access of visitors to the ship, including representatives of seafarers’ welfare and labour organisations.

16.4 Personnel conducting internal audits of the security activities specified in the plan or evaluating its implementation shall be independent of the activities being audited unless this is impracticable due to the size and the nature of the port facility.

16.5 The port facility security plan may be combined with, or be part of, the port secu‐ rity plan or any other port emergency plan or plans.

16.6 The Contracting Government in whose territory the port facility is located shall de‐ termine which changes to the port facility security plan shall not be implemented unless the relevant amendments to the plan are approved by them.

16.7 The plan may be kept in an electronic format. In such a case, it shall be protected by procedures aimed at preventing its unauthorised deletion, destruction or amendment.

16.8 The plan shall be protected from unauthorised access or disclosure.

16.9 Contracting Governments may allow a port facility security plan to cover more

than one port facility if the operator, location, operation, equipment, and design of these port facilities are similar. Any Contracting Government which allows such an alternative arrange‐ ment shall communicate to the organisation particulars thereof.

17. Port Facility Security Officer

17.1 A port facility security officer shall be designated for each port facility. A person may be designated as the port facility security officer for one or more port facilities.

17.2 In addition to those specified elsewhere in this Part of the Code, the duties and re‐ sponsibilities of the port facility security officer shall include, but are not limited to‐

.1 conducting an initial comprehensive security survey of the port facility, taking into account the relevant port facility security assessment;

.2 ensuring the development and maintenance of the port facility security plan;

.3 implementing and exercising the port facility security plan;

.4 undertaking regular security inspections of the port facility to ensure the continuation of appropriate security measures;

.5 recommending and incorporating, as appropriate, modifications to the port facility security plan in order to correct deficiencies and to update the plan to take into account relevant changes to the port facility;

.6 enhancing security awareness and vigilance of the port facility personnel;

.7 ensuring adequate training has been provided to personnel responsible for the security of the port facility;

.8 reporting to the relevant authorities and maintaining records of occurrences which threaten the security of the port facility;

.9 co‐ordinating implementation of the port facility security plan with the appro‐ priate Company and ship security officer(s);

.10 co‐ordinating with security services, as appropriate;

.11 ensuring that standards for personnel responsible for security of the port facility are met;

.12 ensuring that security equipment is properly operated, tested, calibrated and maintained, if any; and

.13 assisting ship security officers in confirming the identity of those seeking to board the ship when requested.

17.3 The port facility security officer shall be given the necessary support to fulfil the duties and responsibilities imposed by Chapter XI‐2 and this Part of the Code.

18. Training, Drills and Exercises on Port Facility Security

18.1 The port facility security officer and appropriate port facility security personnel shall have knowledge and have received training, taking into account the guidance given in Part B of this Code.

18.2 Port facility personnel having specific security duties shall understand their duties and responsibilities for port facility security, as described in the port facility security plan, and shall have sufficient knowledge and ability to perform their assigned duties, taking into ac‐ count the guidance given in Part B of this Code.

18.3 To ensure the effective implementation of the port facility security plan, drills shall be carried out at appropriate intervals, taking into account the types of operation of the port facility, port facility personnel changes, the type of ship the port facility is serving and other relevant circumstances, taking into account guidance given in Part B of this Code.

18.4 The port facility security officer shall ensure the effective co‐ordination and im‐ plementation of the port facility security plan by participating in exercises at appropriate in‐ tervals, taking into account the guidance given in Part B of this Code.

19. Verification and Certification for Ships

19.1 Verifications

19.1.1 Each ship to which this Part of the Code applies shall be subject to the verifi‐ cations specified below‐

.1 an initial verification before the ship is put in service or before the certificate required under section 19.2 is issued for the first time, which shall include a complete verification of its security system and any associated security equip‐ ment covered by the relevant provisions of Chapter X 1‐2 of this Part of the Code and of the approved ship security plan. This verification shall ensure that the security system and any associated security equipment of the ship fully complies with the applicable requirements of Chapter XI‐2 and this Part of the Code, is in satisfactory condition and fit for the service for which the ship is intended;

.2 a renewal verification at intervals specified by the Administration, but not ex‐ ceeding five years, except where section 19.3 is applicable. This verification shall ensure that the security system and any associated security equipment of the ship fully complies with the applicable requirements of Chapter XI‐2 of this Part of the Code and the approved ship security plan, is in satisfactory condi‐ tion and fit for the service for which the ship is intended;

.3 at least one intermediate verification. If only one intermediate verification is carried out it shall take place between the second and third anniversary date of the certificate as defined in regulation 112(n). The intermediate verification shall include inspection of the security system and any associated security equipment of the ship to ensure that it remains satisfactory for the service for

which the ship is intended. Such intermediate verification shall be endorsed on the certificate;

.4 any additional verifications as determined by the Administration.

19.1.2 The verifications of ships shall be carried out by officers of the Administra‐ tion. The Administration may, however, entrust the verifications to a recognised security or‐ ganisation referred to in regulation XI‐2/1.

19.1.3 In every case, the Administration concerned shall fully guarantee the com‐ pleteness and efficiency of the verification and shall undertake to ensure the necessary ar‐ rangements to satisfy this obligation.

19.1.4 The security system and any associated security equipment of the ship after verification shall be maintained to conform with the provisions of regulations XI‐2/4.2 and XI‐2/6, of this Part of the Code and of the approved ship security plan. After any verification under section 19.1.1 has been completed, no changes shall be made in the security system and in any associated security equipment or the approved ship security plan without the sanction of the Administration.

19.2Issue or endorsement of Certificate

19.2.1 An International Ship Security Certificate shall be issued after the initial or re‐ newal verification in accordance with the provisions of section 19.1.

19.2.2 Such Certificate shall be issued or endorsed either by the Administration or by a recognised security organisation acting on behalf of the Administration.

19.2.3 Another Contracting Government may, at the request of the Administration, cause the ship to be verified and, if satisfied that the provisions of section 19.1.1 are complied with, shall issue or authorise the issue of an International Ship Security Certificate to the ship

and, where appropriate, endorse or authorise the endorsement of that Certificate on the ship, in accordance with this Code.

19.2.3.1 A copy of the Certificate and a copy of the verification report shall be transmitted as soon as possible to the requesting Administration.

19.2.3.2 A Certificate so issued shall contain a statement to the effect that it has been issued at the request of the Administration and it shall have the same force and receive the same recognition as the Certificate issued under section 19.2.2.

19.2.4 The International Ship Security Certificate shall be drawn up in a form corre‐ sponding to the model given in the appendix to this Code. If the language used is not English, French or Spanish, the text shall include a translation into one of these languages.

19.3 Duration and validity of Certificate

19.3.1 An International Ship Security Certificate shall be issued for a period specified by the Administration, which shall not exceed five years.

19.3.2 When the renewal verification is completed within three months before the ex‐ piry date of the existing Certificate, the new Certificate shall be valid from the date of comple‐ tion of the renewal verification to a date not exceeding five years from the date of expiry of the existing Certificate.

19.3.2.1 When the renewal verification is completed after the expiry date of the existing Certificate, the new Certificate shall be valid from the date of completion of the re‐ newal verification to a date not exceeding five years from the date of expiry of the existing Certificate.

19.3.2.2 When the renewal verification is completed more than three months be‐ fore the expiry date of the existing Certificate, the new Certificate shall be valid from the date of completion of the renewal verification to a date not exceeding five years from the date of completion of the renewal verification.

19.3.3 If a Certificate is issued for a period of less than five years, the Administration may extend the validity of the Certificate beyond the expiry date to the maximum period specified in section 19.3.1, provided that the verifications referred to in section 19.1.1 applic‐ able when a Certificate is issued for a period of five years are carried out as appropriate.

19.3.4 If a renewal verification has been completed and a new Certificate cannot be issued or placed on board the ship before the expiry date of the existing Certificate, the Ad‐ ministration or recognised security organisation acting on behalf of the Administration may endorse the existing Certificate and such a Certificate shall be accepted as valid for a further period which shall not exceed five months from the expiry date.

19.3.5 If a ship, at the time when a Certificate expires, is not in a port in which it is to be verified, the Administration may extend the period of validity of the Certificate but this extension shall be granted only for the purpose of allowing the ship to complete its voyage to the port in which it is to be verified, and then only in cases where it appears proper and rea‐ sonable to do so. No Certificate shall be extended for a period longer than three months, and the ship to which an extension is granted shall not, on its arrival in the port in which it is to be verified, be entitled by virtue of such extension to leave that port without having a new Cer‐ tificate. When the renewal verification is completed, the new Certificate shall be valid to a date not exceeding five years from the expiry date of the existing Certificate before the exten‐ sion was granted.

19.3.6 A Certificate issued to a ship engaged on short voyages which has not been ex‐ tended under the foregoing provisions of this section may be extended by the Administration for a period of grace of up to one month from the date of expiry stated on it. When the re‐ newal verification is completed, the new Certificate shall be valid to a date not exceeding five years from the date of expiry of the existing Certificate before the extension was granted.

19.3.7 If an intermediate verification is completed before the period specified in sec‐ tion 19.1.1, then‐

.1 the expiry date shown on the Certificate shall be amended by endorsement to a date which shall not be more than three years later than the date on which the intermediate verification was completed;

.2 the expiry date may remain unchanged provided one or more additional verifi‐ cations are carried out so that the maximum intervals between the verifications prescribed by section 19.1.1 are not exceeded.

19.3.8 A Certificate issued under section 19.2 shall cease to be valid in any of the fol‐ lowing cases‐

.1 if the relevant verifications are not completed within the periods specified un‐ der section 19.1.1;

.2 if the Certificate is not endorsed in accordance with section 19.1.1.3 and 19.3.7.1, ifapplicable;

.3 when a Company assumes the responsibility for the operation of a ship not previously operated by that Company; and

.4 upon transfer of the ship to the flag of another State.

19.3.9 In the case of‐

.1 a transfer of a ship to the flag of another Contracting Government, the Con‐ tracting Government whose flag the ship was formerly entitled to fly shall, as soon as possible, transmit to the receiving Administration copies of, or all in‐ formation relating to, the International Ship Security Certificate carried by the ship before the transfer and copies of available verification reports; or

.2 a Company that assumes responsibility for the operation of a ship not previously operated by that Company, the previous Company shall, as soon as pos‐

sible, transmit to the receiving Company copies of any information related to the International Ship Security Certificate or to facilitate the verifications de‐ scribed in section 19.4.2.

19.4 Interim certification

19.4.1 The Certificates specified in section 19.2 shall be issued only when the Ad‐ ministration issuing the Certificate is fully satisfied that the ship complies with the require‐ ments of section 19.1. However, after 1 July 2004, for the purposes of‐

.1 a ship without a Certificate, on delivery or prior to its entry or re‐entry into service;

.2 transfer of a ship from the flag of a Contracting Government to the flag of an‐ other Contracting Government;

.3 transfer of a ship to the flag of a Contracting Government from a State which is not a Contracting Government; or

.4 a Company assuming the responsibility for the operation of a ship not previously operated by that Company,

until the Certificate referred to in section 19.2 is issued, the Administration may cause an In‐ terim International Ship Security Certificate to be issued, in a form corresponding to the model given in the appendix to this Part of the Code.

19.4.2 An Interim International Ship Security Certificate shall only be issued when the Administration or recognised security organisation, on behalf of the Administration, has verified that‐

.1 the ship security assessment required by this Part of the Code has been completed;

.2 a copy of the ship security plan meeting the requirements of Chapter XI‐2 and Part A of this Code is provided on board, has been submitted for review and approval, and is being implemented on the ship;

.3 the ship is provided with a ship security alert system meeting the requirements of regulation XI‐2/6, if required;

.4 the company security officer‐

.1 has ensured‐

.1 the review of the ship security plan for compliance with this Part of the Code;

.2 that the plan has been submitted for approval; and

.3 that the plan is being implemented on the ship; and

.2 has established the necessary arrangements, including arrangements for

drills, exercises and internal audits, through which the company security officer is satisfied that the ship will successfully complete the required verification in accordance with section 19. 1.1.1, within six months;

.5 arrangements have been made for carrying out the required verifications under section 19 .1.1.1;

.6 the master, the ship security officer and other ship’s personnel with specific security duties are familiar with their duties and responsibilities as specified in this Part of the Code; and with the relevant provisions of the ship security plan placed on board; and have been provided such information in the working lan‐ guage of the ship’s personnel or languages understood by them; and

.7 the ship security officer meets the requirements of this Part of the Code.

19.4.3 An Interim International Ship Security Certificate may be issued by the Ad‐ ministration or by a recognised security organisation authorised to act on its behalf.

19.4.4 An Interim International Ship Security Certificate shall be valid for six

months, or until the Certificate required by section 19.2 is issued, whichever comes first, and may not be extended.

19.4.5 No Contracting Government shall cause a subsequent, consecutive Interim In‐ ternational Ship Security Certificate to be issued to a ship if, in the judgment of the Admini‐ stration or the recognised security organisation, one of the purposes of the ship or a Company in requesting such certificate is to avoid full compliance with Chapter XI‐2 and this Part of the Code beyond the period of the initial Interim Certificate as specified in section 19.4.4.

19.4.6 For the purposes of regulation XI‐2/9, Contracting Governments may, prior to accepting an Interim International Ship Security Certificate as a valid Certificate, ensure that the requirements of sections 19.4.2.4 to 19.4.2.6 have been met.

APPENDIX TO PART A APPENDIX 1

(Official seal)

Form of the International Ship Security Certificate

INTERNATIONAL SHIP SECURITY CERTIFICATE

Certificate Number …………………………..

Issued under the provisions of the APPENDIX 1−continued

INTERNATIONAL CODE FOR THE SECURITY OF SHIPS AND OF PORT FACILITIES

(ISPS CODE)

Under the authority of the Government of …………………………………………………… .

(name of State)

by ……………………………………………………………………………………………………………. .

(person(s) or organisation authorised)

Name of ship : …………………………………………………………………….. Distinctive number or letters : ……………………………………………………………………..

Port of registry :

Type of ship :

Gross tonnage :

IMO Number :

Name and address of the Company THIS IS TO CERTIFY:

1. that the security system and any associated security equipment of the ship has been verified in accordance with section 19.1 of Part A of the ISPS Code;

2. that the verification showed that the security system and any associated security equipment of the ship is in all respects satisfactory and that the ship complies with the applicable require‐ ments of Chapter XI‐2 of the Convention and Part A of the ISPS Code;

3. that the ship is provided with an approved ship security plan.

Date ofinitiallrenewal verification on which this Certificate is based ………………. . This Certificate is valid until ……………………………………………………………………….. .

subject to verifications in accordance with section 19.1.1 of Part A of the ISPS Code. Issued at …………………………………………………..

(Place of issue of the Certificate)

Date of issue …………………………….

(Signature of the duly authorised official issuing the Certificate)

(Seal or stamp of issuing authority, as appropriate)

ENDORSEMENT FOR INTERMEDIATE VERIFICATION

THIS IS TO CERTIFY that at an intermediate verification required by section 19.1.1 of Part A of the ISPS Code the ship was found to comply with the relevant provisions of Chapter XI‐2 of the Convention and Part A of the ISPS Code.

Intermediate verification

Signed ……………………………………….. .

(Signature of authorised official)

Place …………………………………………. .

Date …………………………………………. .

APPENDIX 1−continued

(Seal or stamp of the authority, as appropriate)

ENDORSEMENT FOR ADDITIONAL VERlFlCATIONS∙

Additional verification

Additional verification

Signed ……………………………………….. .

(Signature of authorised official)

Place …………………………………………. .

Date ………………………………………….. .

(Seal or stamp of the authority, as appropriate)

Signed ……………………………………….. .

(Signature of authorised official)

Place ………………………………………….. .

Date ………………………………………….. .

(Seal or stamp of the authority, as appropriate)

Additional verification

Signed ……………………………………….. .

(Signature of authorised official)

Place …………………………………………..

Date ……………………………………………

(Seal or stamp of the authority, as appropriate)

ADDITIONAL VERIFICATION IN ACCORDANCE WITH SECTION A/19.3.7.2

OF THE ISPS CODE

THIS IS TO CERTIFY that at an additional verification required by section 19.3.7.2 of Part A of the ISPS Code the ship was found to comply with the relevant provisions of Chapter XI‐2 of the Convention and Part A of the ISPS Code.

Signed ……………………………………….. .

(Signature of authorised official)

Place ………………………………………….. .

Date …………………………………………… .

(Seal or stamp of the authority, as appropriate)

ENDORSEMENT TO EXTEND THE CERTIFICATE IF V ALlD FOR LESS THAN FIVE YEARS WHERE SECTION A/19.3.3 OF THE ISPS CODE APPLIES

The ship complies with the relevant provisions of part A of the ISPS Code, and the Certificate shall, in accordance with section 19.3.3 of Part A of to ISPS Code, be accepted as valid until .

Signed ……………………………………….. .

(Signature of authorised official)

Place ………………………………………….. .

Date …………………………………………… .

(Seal or stamp of the authority, as appropriate)

ENDORSEMENT WHERE THE RENEWAL VERIFICATION HAS BEEN COMPLETED AND SECTION NI9.3.4 OF THE ISPS CODE APPLIES

The ship complies with the relevant provisions of Part A of the ISPS Code, and the Certificate shall, in accordance with section 19.3.4 of Part A of to ISPS Code, be accepted as valid until .

Signed ……………………………………….. .

(Signature of authorised official)

Place ………………………………………….. .

Date …………………………………………… .

(Seal or stamp of the authority, as appropriate)

ENDORSEMENT TO EXTEND THE VALIDITY OF THE CERTIFICATE UNTIL REACHING THE PORT OF VERIFICATION WHERE SECTION A/19.3.5 OF THE ISPS CODE APPLIES OR FOR A PERlOD OF GRACE WHERE SECTION A/19.3.6 OF THE ISPS CODE APPLIES

This Certificate shall, in accordance with section 19.3.5/19.3.6 of Part A of the ISPS Code, be accepted as valid until ………………………….. …………………………………………………. .

Signed ……………………………………….. .

(Signature of authorised official)

Place ………………………………………….. .

Date …………………………………………… .

(Seal or stamp of the authority, as appropriate)

ENDORSEMENT FOR ADVANCEMENT OF EXPIRY DATE WHERE SECTION A/19.3.7.1 OF THE ISPS CODE APPLIES

In accordance with section 19.3.7.1 of Part A of the ISPS Code, the new expiry date** is .

Signed ……………………………………….. .

(Signature of authorised official)

Place ………………………………………….. .

Date …………………………………………… .

(Seal or stamp of the authority, as appropriate)

* Delete as appropriate.

* * In case of completion of this Part of the Certificate, the expiry date shown on the front of the Certificate shall also be amended accordingly.

APPENDIX 2

Form of the Interim International Ship Security Certificate

INTERIM INTERNATIONAL SHIP SECURITY CERTIFICATE

(Official seal) (state)

Certificate Number ………………………… .

Issued under the provisions ofthe

INTERNATIONAL CODE FOR THE SECURlTY OF SHIPS AND OF PORT FACILITIES (ISPS CODE)

Under the authority of the Government of ………………………………………………….. .

(Name of State)

by ……………………………………………………………………………………………………………..

(Person(s) or organisation authorised)

Name of ship : ………………………………………………… Distinctive number or letters : ……………………………………………….

Port of registry : ………………………………………………..

Type of ship : ………………………………………………

Gross tonnage : ………………………………………….

IMO Number : …………………………………………..

Name and address of Company : …………………………………………. Is this a subsequent, consecutive Interim Certificate? Yes/No*

Is Yes, date of issue of initial Interim Certificate ……………………………………………. .

THIS IS TO CERTIFY THAT the requirements of section AlI9.4.2 of the ISPS Code have been complied with.

This Certificate is issued pursuant to section All 9.4 of the ISPS Code.

This Certificate is valid until ………………………. ………………………………………………..

Issued at …………………………………………………. .

(Place of issue of the Certificate)

Date of issue …………………………… .

(Signature of the duly authorised official issuing the Certificate)

(Seal or stamp ofissuing authority, as appropriate)

*Delete as appropriate.

PART B

Guidance regarding the provisions of Chapter Xl‐2 of the Annex to the international Convention for the Safety of Life at Sea, 1974 as amended and Part A of this Code

1. INTRODUCTION General

1.1 The preamble of this Code indicates that Chapter XI‐2 and Part A of this Code es‐ tablish the new international framework of measures to enhance maritime security and through which ships and port facilities can co‐operate to detect and deter acts which threaten security in the maritime transport sector.

1.2 This introduction outlines, in a concise manner, the processes envisaged in establish‐ ing and implementing the measures and arrangements needed to achieve and maintain compli‐ance with the provisions of Chapter XI‐2 and of Part A of this Code and identifies the main elements on which guidance is offered. The guidance is provided in paragraphs 2 through

to 19. It also sets down essential considerations which should be taken into account when con‐ sidering the application of the guidance relating to ships and port facilities.

1.3 If the reader’s interest relates to ships alone, it is strongly recommended that this Part of the Code is still read as a whole, particularly the paragraphs relating to port facilities.

The same applies to those whose primary interest is port facilities; they should also read the paragraphs relating to ships.

1.4 The guidance provided in the following paragraphs relates primarily to protection of the ship when it is at a port facility. There could, however, be situations when a ship may pose a threat to the port facility, e.g. because, once within the port facility, it could be used as a base from which to launch an attack. When considering the appropriate security measures to respond to ship‐based security threats, those completing the port facility security assessment or preparing the port facility security plan should consider making appropriate adaptations to the guidance offered in the following paragraphs.

1.5 The reader is advised that nothing in this Part of the Code should be read or inter‐ preted in conflict with any of the provisions of either Chapter XI‐2 or Part A of this Code and that the aforesaid provisions always prevail and override any unintended inconsistency which may have been inadvertently expressed in this Part of the Code. The guidance provided in this Part of the Code should always be read, interpreted and applied in a manner which is consis‐ tent with the aims, objectives and principles established in Chapter XI‐2 and Part A of this Code.

Responsibilities of Contracting Governments

1.6 Contracting Governments have, under the provisions of Chapter XI‐2 and Part A of this Code, various responsibilities, which, amongst others, include‐

− setting the applicable security level;

− approving the ship security plan (SSP) and relevant amendments to a previ‐ ously approved Plan;

− verifying the compliance of ships with the provisions of Chapter XI‐2 and Part A of this Code and issuing to ships the International Ship Security Certificate;

− determining which of the port facilities located within their territory are re‐ quired to designate a port facility security officer (PFSO) who will be respon‐ sible for the preparation of the port facility security plan;

− ensuring completion and approval of the port facility security assessment

(PFSA) and of any subsequent amendments to a previously approved assessment;

− approving the port facility security plan (PFSP) and any subsequent amend‐ ments to a previously approved plan;

− exercising control and compliance measures; testing approved plans; and

− communicating information to the International Maritime Organisation and to the shipping and port industries.

1.7 Contracting Governments can designate, or establish, Designated Authorities within Government to undertake with respect to port facilities, their security duties under Chapter XI‐2 and Part A of this Code and allow recognised security organisations to carry out certain work with respect to port facilities, but the final decision on the acceptance and approval of this work should be given by the Contracting Government or the Designated Authority. Administrations may also delegate the undertaking of certain security duties, relating to ships, to recognised secu‐ rity organisations. The following duties or activities cannot be delegated to a recognised security organisation‐

− setting of the applicable security level;

− determining which of the port facilities located within the territory of a Con‐ tracting Government are required to designate a PFSO and to prepare a PFSP; approving a PFSA or any subsequent amendments to a previously approved assessment;

− approving a PFSP or any subsequent amendments to a previously approved plan; exercising control and compliance measures; and

− establishing the requirements for a Declaration of Security.

Setting the security level

1.8 The setting of the security level applying at any particular time is the responsibility of Contracting Governments and can apply to ships and port facilities. Part A of this Code defines three security levels for international use. These are‐

− Security level I, normal; the level at which ships and port facilities normally operate;

− Security level 2, heightened; the level applying for as long as there is a height‐ ened risk of a security incident; and

− Security level 3, exceptional; the level applying for the period of time when there is the probable or imminent risk of a security incident.

The Company and the ship

1.9 Any Company operating ships to which Chapter XI‐2 and Part A of this Code apply has to designate a CSO for the Company and a SSO for each of its ships. The duties, responsi‐ bilities and training requirements of these officers and requirements for drills and exercises are defined in Part A of this Code.

1.10 The company security officer’s responsibilities include, in brief amongst others, ensuring that a ship security assessment (SSA) is properly carried out, that a SSP is prepared and submitted for approval by, or on behalf of, the Administration and thereafter is placed on board each ship to which Part A of this Code applies and in respect of which that person has been appointed as the CSO.

1.11 The SSP should indicate the operational and physical security measures the ship it‐ self should take to ensure it always operates at security level I. The plan should also indicate the additional, or intensified, security measures the ship itself can take to move to and operate at security level 2 when instructed to do so. Furthermore, the plan should indicate the possible preparatory actions the ship could take to allow prompt response to the instructions that may be issued to the ship by those responding at security level 3 to a security incident or threat thereof.

1.12 The ships to which the requirements of Chapter XI‐2 and Part A of this Code apply are required to have, and operated in accordance with, a SSP approved by, or on behalf of, the Administration. The CSO and the SSO should monitor the continuing relevance and effec‐ tiveness of the plan, including the undertaking of internal audits. Amendments to any of the elements of an approved plan, for which the Administration has determined that approval is required, have to be submitted for review and approval before their incorporation into the ap‐ proved plan and their implementation by the ship.

1.13 The ship has to carry an International Ship Security Certificate indicating that it complies with the requirements of Chapter XI‐2 and Part A of this Code. Part A of this Code includes provisions relating to the verification and certification of the ship’s compliance with the requirements on an initial, renewal and intermediate verification basis.

1.14 When a ship is at a port or is proceeding to a port of a Contracting Government, the Contracting Government has the right, under the provisions of regulation XI‐2/9, to exercise various control and compliance measures with respect to that ship. The ship is subject to port State control inspections but such inspections will not normally extend to examination of the SSP itself except in specific circumstances. The ship may also be subject to additional control measures if the Contracting Government exercising the control and compliance measures has reason to believe that the security of the ship has, or the port facilities it has served have, been compromised.

1.15 The ship is also required to have on board information, to be made available to Contracting Governments upon request, indicating who is responsible for deciding the em‐ ployment of the ship’s personnel and for deciding various aspects relating to the employment ofthe ship.

The port facility

1.16 Each Contracting Government has to ensure completion of a PFSA for each of the port facilities, located within its territory, serving ships engaged on international voyages. The Contracting Government, a Designated Authority or a recognised security organisation must carry out this assessment. The completed PFSA has to be approved by the Contracting Gov‐ ernment or the Designated Authority concerned. This approval cannot be delegated. Port facil‐ ity security assessments should be periodically reviewed.

1.17 The PFSA is fundamentally a risk analysis of all aspects of a port facility’s opera‐ tion in order to determine which partes) of it are more susceptible, and/or more likely, to be

the subject of attack. Security risk is a function of the threat of an attack coupled with the vul‐ nerability of the target and the consequences of an attack.

The assessment must include the following components‐

− determination of the perceived threat to port installations and infrastructure;

− identification of the potential vulnerabilities; and

− calculation of the consequences of incidents.

On completion of the analysis, it will be possible to produce an overall assessment of the level of the risk. The PFSA will help determine which port facilities are required to appoint a PFSO and to prepare a PFSP.

1.18 The port facilities which have to comply with the requirements of Chapter XI‐2 and Part A of this Code are required to designate a PFSO. The duties, responsibilities and training requirements of these officers and requirements for drills and exercises are defined in Part A of this Code.

1.19 The PFSP should indicate the operational and physical security measures the port facility should take to ensure that it always operates at security level 1. The plan should also indicate the additional, or intensified, security measures the port facility can take to move to and operate at security level 2 when instructed to do so. Furthermore, the plan should indicate the possible preparatory actions the port facility could take to allow prompt response to the instructions that may be issued by those responding at security level 3 to a security incident or threat thereof.

1.20 The port facilities which have to comply with the requirements of Chapter XI‐2 and Part A of this Code are required to have, and operate in accordance with, a PFSP approved by the Contracting Government or by the Designated Authority concerned. The PFSO should implement its provisions and monitor the continuing effectiveness and relevance of the plan, including commissioning internal audits of the application of the plan. Amendments to any of the elements of an approved plan, for which the Contracting Government or the Designated Authority concerned has determined that approval is required, have to be submitted for review and approval before their incorporation into the approved plan and their implementation at the port facility. The Contracting Government or the Designated Authority concerned may test the effectiveness of the plan. The PFSA covering the port facility or on which the development of the plan has been based should be regularly reviewed. All these activities may lead to amend‐ ment of the approved plan. Any amendments to specified elements of an approved plan will have to be submitted for approval by the Contracting Government or by the Designated Au‐ thority concerned.

1.21 Ships using port facilities may be subject to the port State control inspections and additional control measures outlined in regulation XI‐2/9. The relevant authorities may re‐ quest the provision of information regarding the ship, its cargo, passengers and ship’s person‐ nel prior to the ship’s entry into port. There may be circumstances in which entry into port could be denied.

Information and communication

1.22 Chapter XI‐2 and Part A of this Code require Contracting Governments to provide certain information to the International Maritime Organisation and for information to be made available to allow effective communication between Contracting Governments and between company security officers/ship security officers and the port facility security officers.

2. DEFINITIONS

2.1 No guidance is provided with respect to the definitions set out in Chapter XI‐2 or Part A of this Code.

2.2 For the purpose of this Part of the Code‐

.1 “section” means a section of Part A of the Code and is indicated as “section A”<followed by the number of the section>”;

.2 “paragraph” means a paragraph of this Part of the Code and is indicated as

“paragraph<followed by the number of the paragraph>”; and

.3 “Contracting Government”, when used in paragraphs 14 to 18, means the “Contacting Government within whose territory the port facility is lo‐ cated” and includes a reference to the Designated Authority.

3. APPLICATION

General

3.1 The guidance given in this Part of the Code should be taken into account when im‐ plementing the requirements of Chapter XI‐2 and Part A of this Code.

3.2 However, it should be recognised that the extent, to which the guidance on ships ap‐ plies will depend on the type of ship, its cargoes and/or passengers, its trading pattern and the characteristics of the port facilities visited by the ship.

3.3 Similarly, in relation to the guidance on port facilities, the extent to which this guid‐ ance applies will depend on the port facilities, the types of ships using the port facility, the types of cargo and/or passengers and the trading patterns of visiting ships.

3.4 The provisions of Chapter XI‐2 and Part A of this Code are not intended to apply to port facilities designed and used primarily for military purposes.

4. RESPONSlBILlTlES OF CONTRACTING GOVERNMENTS

Security of assessments and plans

4.1 Contracting Governments should ensure that appropriate measures are in place to avoid unauthorised disclosure of, or access to, security‐sensitive material relating to ship secu‐ rity assessments (SSAs), ship security plans (SSPs), port facility security assessments (PFSAs) and port facility security plans (PFSPs), and to individual assessments or plans.

Designated Authorities

4.2 Contracting Governments may identify a Designated Authority within Government to undertake their security duties relating to port facilities as set out in Chapter XI‐2 or Part A ofthis Code.

Recognised security organisations

4.3 Contracting Governments may authorise a recognised security organisation (RSa) to undertake certain security‐related acstivities, including‐

.1 approval of ship security plans, or amendments thereto, on behalf of the Administration;

.2 verification and certification of compliance of ships with the requirements of Chapter XI‐2 and Part A of this Code on behalf of the Administration; and

.3 conducting port facility security assessments required by the Contracting Government.

4.4 An RSO may also advise or provide assistance to Companies or port facilities on se‐ curity matters, including ship security assessments, ship security plans, port facility security assessments and port facility security plans. This can include completion of a SSA or SSP or PFSA or PFSP. If an RSO has done so in respect of a SSA or SSP, that RSO should not be authorised to approve that SSP.

4.5 When authorising an RSO, Contracting Governments should give consideration to the competency of such an organisation. An RSO should be able to demonstrate‐

.1 expertise in relevant aspects of security;

.2 appropriate knowledge of ship and port operations, including knowledge of ship design and construction if providing services in respect of ships and of port design and construction if providing services in respect of port facilities;

.3 their capability to assess the likely security risks that could occur during ship and port facility operations, including the ship/port interface, and how to mini‐ mise such risks;

.4 their ability to maintain and improve the expertise of their personnel;

.5 their ability to monitor the continuing trustworthiness of their personnel;

.6 their ability to maintain appropriate measures to avoid unauthorised disclosure of, or access to, security‐sensitive material;

.7 their knowledge of the requirements of Chapter XI‐2 and Part A of this Code and relevant national and international legislation and security requirements;

.8 their knowledge of current security threats and patterns;

.9 their knowledge of recognition and detection of weapons, dangerous sub‐ stances and devices;

.10 their knowledge of recognition, on a non‐discriminatory basis, of characteris‐ tics and behavioural patterns of persons who are likely to threaten security;

.11 their knowledge of techniques used to circumvent security measures; and

.12 their knowledge of security and surveillance equipment and systems and their operational limitations.

When delegating specific duties to a RSO, Contracting Governments, including Admini‐ strations, should ensure that the RSO has the competencies needed to undertake the task.

4.6 A recognised organisation, as referred to in regulation 1/6 and fulfilling the require‐ ments of regulation XI‐1/1, may be appointed as a RSO provided it has the appropriate security‐related expertise listed in paragraph 4.5.

4.7 A port or harbour Authority or port facility operator may be appointed as a RSO provided it has the appropriate security‐related expertise listed in paragraph 4.5.

Setting the security level

4.8 In setting the security level, Contracting Governments should take account of gen‐ eral and specific threat information. Contracting Governments should set the security level applying to ships or port facilities at one of three levels‐

− Security level I, normal; the level at which the ship or port facility normally operates;

− Security level 2, heightened; the level applying for as long as there is a height‐ ened risk of a security incident; and

− Security level 3, exceptional; the level applying for the period of time when there is the probable or imminent risk of a security incident.

4.9 Setting security level 3 should be an exceptional measure applying only when there is credible information that a security incident is probable or imminent. Security level 3 should only be set for the duration of the identified security treat or actual security incident. While the security levels may change from security level 1, through security level 2 to secu‐ rity level 3, it is also possible that the security levels will change directly from security level 1 to security level 3.

4.10 At all times the master of a ship has the ultimate responsibility for the safety and security of the ship. Even at security level 3 a master may seek clarification or amendment of instructions issued by those responding to a security incident, or threat thereof, if there are reasons to believe that compliance with any instruction may imperil the safety of the ship.

4.11 The CSO or the SSO should liaise at the earliest opportunity with the PFSO of the port facility the ship is intended to visit to establish the security level applying for that ship at the port facility. Having established contact with a ship, the PFSO should advise the ship of any subsequent change in the port facility’s security level and should provide the ship with any relevant security information.

4.12 While there may be circumstances when an individual ship may be operating at a higher security level than the port facility it is visiting, there will be no circumstances when a ship can have a lower security level than the port facility it is visiting. If a ship has a higher security level than the port facility it intends to use, the CSO or SSO should advise the PFSO without delay. The PFSO should undertake an assessment of the particular situation in consul‐ tation with the CSO or SSO and agree on appropriate security measures with the ship, which may include completion and signing ofa Declaration of Security.

4.13 Contracting Governments should consider how information on changes in security levels should be promulgated rapidly. Administrations may wish to use NA VTEX messages or Notices to Mariners as the method for notifying such changes in security levels to the ship and to CSO and SSO. Or, they may wish to consider other methods of communication that provide equivalent or better speed and coverage. Contracting Governments should establish means of notifying PFSOs of changes in security levels. Contracting Governments should compile and maintain the contact details for a list of those who need to be informed of changes in security levels. Whereas the security level need not be regarded as being particu‐ larly sensitive, the underlying threat information may be highly sensitive. Contracting Gov‐

ernments should give careful consideration to the type and detail of the information conveyed and the method by which it is conveyed to SSOs, CS Os and PFSOs.

Contact points and information on port facility security plans

4.14 Where a port facility has a PFSP, that fact has to be communicated to the Organisa‐ tion and that information must also be made available to CSOs and SSOs. No further details of the PFSPs have to be published other than that it is in place. Contracting Governments should consider establishing either central or regional points of contact, or other means of providing up‐to‐date information on the locations where PFSPs are in place, together with contact details for the relevant PFSO. The existence of such contact points should be publi‐

cised. They could also provide information on the recognised security organisations appointed to act on behalf of the Contracting Government, together with details of the specific responsi‐ bility and conditions of authority delegated to such recognised security organisations.

4.15 In the case of a port that does not have a PFSP (and therefore does not have a PFSO), the central or regional point of contact should be able to identify a suitably qualified

person ashore who can arrange for appropriate security measures to be in place, if needed, for the duration of the ship’s visit.

4.16 Contracting Governments should also provide the contact details of Government officers to whom an SSO, a CSO and a PFSO can report security concerns. These Govern‐ ment officers should assess such reports before taking appropriate action. Such reported con‐ cerns may have a bearing on the security measures falling under the jurisdiction of another Contracting Government. In that case, the Contracting Governments should consider contact‐

ing their counterpart in the other Contracting Government to discuss whether remedial action is appropriate. For this purpose, the contact details of the Government officers should be communicated to the International Maritime Organisation.

4.17 Contracting Governments should also make the information indicated in para‐ graphs 4.14 to 4.16 available to other Contracting Governments on request.

Identification documents

4.18 Contracting Governments are encouraged to issue appropriate identification docu‐ ments to Government officials entitled to board ships or enter port facilities when performing their official duties and to establish procedures whereby the authenticity of such documents might be verified.

Fixed and floating platforms and mobile offshore drilling units on location

4.19 Contracting Governments should consider establishing appropriate security meas‐ ures for fixed and floating platforms and mobile offshore drilling units on location to allow interaction with ships which are required to comply with the provisions of Chapter Xl‐2 and Part A of this Code.

Ships which are not required to comply with Part A of this Code

4.20 Contracting Governments should consider establishing appropriate security meas‐ ures to enhance the security of ships to which Chapter Xl‐2 and Part A of this Code do not apply and to ensure that any security provisions applying to such ships allow interaction with ships to which Part A of this Code applies.

Threats to ships and other incidents at sea

4.21 Contracting Governments should provide general guidance on the measures con‐ sidered appropriate to reduce the security risk to ships flying their flag when at sea. They should provide specific advice on the action to be taken in accordance with security levels 1 to 3, if‐

.1 there is a change in the security level applying to the ship while it is at sea, e.g. because of the geographical area in which it is operating or relating to the ship itself; and

.2 there is a security incident or threat thereof involving the ship while at sea.

Contracting Governments should establish the best methods and procedures for these purposes. In the case of an imminent attack, the ship should seek to establish direct communi‐ cation with those responsible in the flag State for responding to security incidents.

4.22 Contracting Governments should also establish a point of contact for advice on se‐ curity for any ship‐

.1 entitled to fly their flag; or

.2 operating in their territorial sea or having communicated an intention to enter their territorial sea.

4.23 Contracting Governments should offer advice to ships operating in their territorial sea or having communicated an intention to enter their territorial sea, which could include advice‐

.1 to alter or delay their intended passage;

.2 to navigate on a particular course or proceed to a specific location;

.3 on the availability of any personnel or equipment that could be placed on the ship;

.4 to co‐ordinate the passage, arrival into port or departure from port, to allow escort by patrol craft or aircraft (fixed‐wing or helicopter).

Contracting Governments should remind ships operating in their territorial sea, or having communicated an intention to enter their territorial sea, of any temporary restricted areas that they have published.

4.24 Contracting Governments should recommend that ships operating in their territorial sea, or having communicated an intention to enter their territorial sea, implement expedi‐ tiously, for the ship’s protection and for the protection of other ships in the vicinity, any secu‐ rity measure the Contracting Government may have advised.

4.25 The plans prepared by the Contracting Governments for the purposes given in paragraph 4.22 should include information on an appropriate point of contact, available on a 24‐hour basis, within the Contracting Government including the Administration. These plans should also include information on the circumstances in which the Administration considers assistance should be sought from nearby coastal States, and a procedure for liaison between PFSOs and SSOs.

Alternative security agreements

4.26 Contracting Governments, in considering how to implement Chapter XI‐2 and PaJ1 A of this Code, may conclude one or more agreements with one or more Contracting Governments. The scope of an agreement is limited to short international voyages on fixed

routes between port facilities in the territory of the parties to the agreement. When concluding an agreement, and thereafter, the Contracting Governments should consult other Contracting Governments and Administrations with an interest in the effects of the agreement. Ships fly‐ ing the flag of a State that is not party to the agreement should only be allowed to operate on the fixed routes covered by the agreement if their Administration agrees that the ship should comply with the provisions of the agreement and requires the ship to do so. In no case can such an agreement compromise the level of security of other ships and port facilities not cov‐ ered by it, and specifically, all ships covered by such an agreement may not conduct ship‐to‐ ship activities with ships not so covered. Any operational interface undertaken by ships cov‐ ered by the agreement should be covered by it. The operation of each agreement must be con‐ tinually monitored and amended when the need arises and in any event should be reviewed every five years.

Equivalent arrangements for port facilities

4.27 For certain specific port facilities with limited or special operations but with more than occasional traffic, it may be appropriate to ensure compliance by security measures equivalent to those prescribed in Chapter XI‐2 and in Part A ofthis Code. This can, in particu‐ lar, be the case for terminals such as those attached to factories, or quaysides with no frequent operations.

Manning level

4.28 In establishing the minimum safe manning of a ship, the Administration should take into account that the minimum safe manning provisions established by regulation VI14

only address the safe navigation of the ship. The Administration should also take into account any additional workload which may result from the implementation of the SSP and ensure that the ship is sufficiently and effectively manned. In doing so, the Administration should verify that ships are able to implement the hours of rest and other measures to address fatigue which have been promulgated by national law, in the context of all shipboard duties assigned to the various shipboard personnel.

Control and compliance measures General

4.29 Regulation XI‐2/9 describes the control and compliance measures applicable to

ships under Chapter XI‐2. It is divided into three distinct sections; control of ships already in a port, control of ships intending to enter a port of another Contracting Government, and addi‐ tional provisions applicable to both situations.

4.30 Regulation XI‐2/9.1, Control of ships in port, implements a system for the control of ships while in the port of a foreign country where duly authorised officers of the Contract‐ ing Government (“duly authorised officers”) have the right to go on board the ship to verify

that the required certificates are in proper order. Then, if there are clear grounds to believe the ship does not comply, control measures such as additional inspections or detention may be taken. This reflects current control systems. Regulation XI‐2/9.1 builds on such systems and allows for additional measures (including expulsion of a ship from a port to be taken as a con‐ trol measure) when duly authorised officers have clear grounds for believing that a ship is in non‐compliance with the requirements of Chapter XI‐2 or Part A of this Code. Regula‐

tion XI‐2/9.3 describes the safeguards that promote fair and proportionate implementation of these additional measures.

4.31 Regulation XI‐2/9.2 applies control measures to ensure compliance to ships intend‐ ing to enter a port of another Contracting Government and introduces an entirely different concept of control within Chapter XI‐2, applying to security only. Under this regulation, measures may be implemented prior to the ship entering port, to better ensure security. Just as in regulation XI‐2/9.1, this additional control system is based on the concept of clear grounds for believing the ship does not comply with Chapter XI‐2 or Part A of this Code, and includes significant safeguards in regulations Xl‐2/9.2.2 and XI‐2/9.2.5 as well as in regula‐

tion XI‐2/9.3.

4.32 Clear grounds that the ship is not in compliance means evidence or reliable infor‐ mation that the ship does not correspond with the requirements of Chapter XI‐2 or Part A of this Code, taking into account the guidance given in this Part of the Code. Such evidence or reliable information may arise from the duly authorised officer’s professional judgment or observations gained while verifying the ship’s International Ship Security Certificate or In‐ terim International Ship Security Certificate issued in accordance with Part A of this Code (“Certificate”) or from other sources. Even if a valid Certificate is on board the ship, the duly authorised officers may still have clear grounds for believing that the ship is not in compliance based on their professional judgment.

4.33 Examples of possible clear grounds under regulations XI‐2/9.1 and XI‐2/9.2 may include, when relevant‐

.1 evidence from a review of the certificate that it is not valid or it has expired;

.2 evidence or reliable information that serious deficiencies exist in the security equipment, documentation or arrangements required by Chapter XI‐2 and Part A of this Code;

.3 receipt of a report or complaint which, in the professional judgment of the duly authorised officer, contains reliable information clearly indicating that the ship does not comply with the requirements of Chapter XI‐2 or Part A of this Code;

.4 evidence or observation gained by a duly authorised officer using professional judgment that the master or ship’s personnel is not familiar with essential ship‐ board security procedures or cannot carry our drills related to the security of the ship or that such procedures or drills have not been carried out;

.5 evidence or observation gained by a duly authorised officer using professional judgment that key members of ship’s personnel are not able to establish proper communication with any other key members of ship’s personnel with security responsibilities on board the ship;

.6 evidence or reliable information that the ship has embarked persons or loaded stores or goods at a port facility or from another ship where either the port fa‐ cility or the other ship is in violation of Chapter XI‐2 or Part A of this Code,

and the ship in question has not completed a Declaration of Security, nor taken appropriate special or additional security measures or has not maintained ap‐ propriate ship security procedures;

.7 evidence or reliable information that the ship has embarked persons or loaded stores or goods at a port facility or from another source (e.g., another ship or helicopter transfer) where either the port facility or the other source is not re‐ quired to comply with Chapter XI‐2 or Part A of this Code, and the ship has not taken appropriate, special or additional security measures or has not maintained appropriate security procedures; and

.8 the ship holding a subsequent, consecutively issued Interim International Ship Security Certificate as described in section A/19.4, and, in the professional judgement of an officer duly authorised, one of the purposes of the ship or a Company in requesting such a Certificate is to avoid full compliance with Chapter XI‐2 and Part A of this Code beyond the period of the initial Interim Certificate as described in section A/19.4.4.

4.34 The international law implications of regulation XI‐2/9 are particularly relevant, and the regulation should be implemented with regulation XI‐2/2.4 in mind, as the potential

exists for situations where either measures will be taken which fall outside the scope of Chap‐ ter XI‐2, or where rights of affected ships, outside Chapter XI‐2, should be considered. Thus, regulation XI‐2/9 does not prejudice the Contracting Government from taking measures hav‐ ing a basis in, and consistent with, international law to ensure the safety or security of persons, ships, port facilities and other property in cases where the ship, although in compliance with Chapter XI‐2 and Part A of this Code, is still considered to present a security risk.

4.35 When a Contracting Government imposes control measures on a ship, the Admini‐ stration should, without delay, be contacted with sufficient information to enable the Admini‐ stration to fully liaise with the Contracting Government.

Control of ships in port

4.36 Where the non‐compliance is either a defective item of equipment or faulty docu‐ mentation leading to the ship’s detention and the non‐compliance cannot be remedied in the port of inspection, the Contacting Government may allow the ship to sail to another port pro‐ vided that any conditions agreed between the port States and the Administration or master are met.

Ships intending to enter the port of another Contracting Government

4.37 Regulation XI‐2/9.2.1 lists the information Contracting Governments may require from a ship as a condition of entry into port. One item of information listed is confirmation of any special or additional measures taken by the ship during its last ten calls at a port facility. Examples could include‐

.1 records of the measures taken while visiting a port facility located in the terri‐ tory of a State which is not a Contracting Government, especially those meas‐ ures that would normally have been provided by port facilities located in the territories of Contacting Governments; and

.2 any Declarations of Security that were entered into with port facilities or other ships.

4.38 Another item of information listed, that may be required as a condition of entry into port, is confirmation that appropriate ship security procedures were maintained during ship‐to‐ ship activity conducted within the period of the last ten calls at a port facility. It would not normally be required to include records of transfers of pilots or of customs, immigration or security officials nor bunkering, lightering, loading of supplies and unloading of waste by ship within port facilities as these would normally fall within the auspices of the PFSP. Examples

of information that might be given include‐

.1 records of the measures taken while engaged in a ship‐to‐ship activity with a ship flying the flag of a State which is not a Contacting Government, especially those measures that would normally have been provided by ships flying the flag of Contracting Governments;

.2 records of the measures taken while engaged in a ship‐to‐ship activity with a ship that is flying the flag of a Contracting Government but is not required to

comply with the provisions of Chapter XI‐2 and Part A of this Code, such as a copy of any security certificate issued to that ship under other provisions; and

.3 in the event that persons or goods rescued at sea are on board, all known in‐ formation about such persons or goods, including their identities when known and the results of any checks run on behalf of the ship to establish the security status of those rescued. It is not the intention of Chapter XI‐2 or Part A of this Code to delay or prevent the delivery of those in distress at sea to a place of safety. It is the sole intention of Chapter XI‐2 and Part A of this Code to pro‐ vide States with enough appropriate information to maintain their security integrity.

4.39 Examples of other practical security‐related information that may be required as a condition of entry into port in order to assist with ensuring the safety and security of persons, port facilities, ships and other property include‐

.1 information contained in the Continuous Synopsis Record;

.2 location of the ship at the time the report is made;

.3 expected time of arrival of the ship in port;

.4 crew list;

.5 general description of cargo aboard the ship;

.6 passenger list; and

.7 information required to be carried under regulation XI‐2/5.

4.40 Regulation XI‐2/9.2.5 allows the master of a ship, upon being informed that the coastal or port State will implement control measures under regulation X[‐2/9.2, to with‐ draw the intention for the ship to enter port. If the master withdraws that intention, regula‐

tion X[‐2/9 no longer applies, and any other steps that are taken must be based on, and consis‐ tent with, intemationallaw.

Additional provisions

4.41 In all cases where a ship is denied entry or is expelled from a port, all known facts should be communicated to the authorities of relevant States. This communication should consist of the following, when known‐

.1 name of ship, its flag, the Ship Identification Number, call sign, ship type and cargo;

.2 reason for denying entry or for expulsion from port or port areas;

.3 if relevant, the nature of any security non‐compliance;

.4 if relevant, details of any attempts made to rectify any non‐compliance, includ‐ ing any conditions imposed on the ship for the voyage;

.5 past port(s) of call and next declared port of call;

.6 time of departure and likely estimated time of arrival at those ports;

.7 any instructions given to the ship, e.g., reporting on its route;

.8 available information on the security level at which the ship is currently operating;

.9 information regarding any communications the port State has had with the Administration;

.10 contact point within the port State making the report for the purpose of obtain‐ ing further information;

.11 crew list; and

.12 any other relevant information.

4.42 Relevant States to contact should include those along the ship’s intended passage to its next port, particularly if the ship intends to enter the territorial sea of that coastal State. Other relevant States could include previous ports of call, so that further information might be obtained and security issues relating to the previous ports resolved.

4.43 In exercising control and compliance measures, the duly authorised officers should ensure that any measures or steps imposed are proportionate. Such measures or steps should be reasonable and of the minimum severity and duration necessary to rectify or mitigate the non‐compliance.

4.44 The word “delay” in regulation XI‐2/9.3.5.1 also refers to situations where, pursu‐ ant to actions taken under this regulation, the ship is unduly denied entry into port or the ship is unduly expelled from port.

Non‐Party ships and ships below Convention size

4.45 With respect to ships flying the flag of a State which is not a Contacting Govern‐ ment to the Convention and not a Party to the 1988 SOLAS Protocol), Contracting Govern‐ ments should not give more favourable treatment to such ships. Accordingly, the requirements of regulation XI‐2/9 and the guidance provided in this Part of the Code should be applied to those ships.

4.46 Ships below Convention size are subject to measures by which States maintain se‐ curity. Such measures should be taken with due regard to the requirements in Chapter XI‐2 and the guidance provided in this Part of the Code.

5. DECLARATION OF SECURITY

General

5.1 A Declaration of Security (DoS) should be completed when the Contracting Gov‐ ernment of the port facility deems it to be necessary or when a ship deems it necessary.

5.1.1 The need for a DoS may be indicated by the results of the port facility security assessment (PFSA) and the reasons and circumstances in which a DoS is required should be set out in the port facility security plan (PFSP).

5.1.2 The need for a DoS may be indicated by an Administration for ships entitled to fly its flag or as a result of a ship security assessment (SSA) and should be set out in the ship security plan (SSP).

5.2It is likely that a DoS will be requested at higher security levels, when a ship has a higher security level than the port facility, or another ship with which it interfaces, and for ship/port interface or ship‐to‐ship activities that pose a higher risk to persons, property or the environment for reasons specific to that ship, including its cargo or passengers or the circum‐ stances at the port facility or a combination of these factors.

5.2.1 In the case that a ship or an Administration, on behalf of ships entitled to fly its flag, requests completion of a DoS, the port facility security officer (PFSO) or ship security officer (SSO) should acknowledge the request and discuss appropriate security measures.

5.3A PFSO may also initiate a DoS prior to ship/port interfaces that are identified in the approved PFSA as being of particular concern. Examples may include embarking or disem‐ barking passengers and the transfer, loading or unloading of dangerous goods or hazardous

substances. The PFSA may also identify facilities at or near highly populated areas or eco‐ nomically significant operations that warrant a DoS.

5.4The main purpose of a DoS is to ensure agreement is reached between the ship and the port facility or with other ships with which it interfaces as to the respective security meas‐ ures each will undertake in accordance with the provisions of their respective approved secu‐ rity plans.

5.4.1 The agreed DoS should be signed and dated by both the port facility and the ship(s), as applicable, to indicate compliance with Chapter XI‐2 and Part A of this Code and should include its duration, the relevant security level or levels and the relevant contact details.

5.4.2 A change in the security level may require that a new or revised DoS be completed.

5.5 The DoS should be completed in English, French or Spanish or in a language com‐ mon to both the port facility and the ship or the ships, as applicable.

1. Protocol of 1988 relating to the International Convention for the Safety of Life at Sea, 1974.

S.6 A model DoS is included in Appendix 1 to this Part of the Code. This model is for a DoS between a ship and a port facility. If the DoS is to cover two ships this model should be appropriately adjusted.

6. OBLIGATIONS OF THE COMPANY

General

6.1 Regulation XI‐2/S requires the Company to provide the master of the ship with in‐ formation to meet the requirements of the Company under the provisions of this regulation. This information should include items such as‐

.1 parties responsible for appointing shipboard personnel, such as ship manage‐ ment companies, manning agents, contractors, concessionaries (for example, retail sales outlets, casinos, etc.);

.2 parties responsible for deciding the employment of the ship, including time or bareboat charterer(s) or any other entity acting in such capacity; and

.3 in cases when the ship is employed under the terms of a charter party, the con‐ tact details of those parties, including time or voyage charterers.

6.2 In accordance with regulation XI‐2/S, the Company is obliged to update and keep this information current as and when changes occur.

6.3 This information should be in English, French or Spanish language.

6.4 With respect to ships constructed before 1 July 2004, this information should reflect the actual condition on that date.

6.5 With respect to ships constructed on or after 1 July 2004 and for ships constructed before 1 July 2004 which were out of service on 1 July 2004, the information should be pro‐ vided as from the date of entry of the ship into service and should reflect the actual condition on that date.

6.6 After 1 July 2004, when a ship is withdrawn from service, the information should be provided as from the date of re‐entry of the ship into service and should reflect the actual con‐ dition on that date.

6.7 Previously provided information that does not relate to the actual condition on that date need not be retained on board.

6.8 When the responsibility for the operation of the ship is assumed by another Com‐ pany, the information relating to the Company which operated the ship is not required to be left on board.

In addition, other relevant guidance is provided under sections 8, 9 and 13.

7. SHIP SECURITY

Relevant guidance is provided under sections 8, 9 and 13.

8. SHIP SECURITY ASSESSMENT

Security assessment

8.1 The company security officer (CSO) is responsible for ensuring that a ship security assessment (SSA) is carried out for each of the ships in the Company’s fleet which is required to comply with the provisions of Chapter XI‐2 and Part A of this Code for which the CSO is responsible. While the CSO need not necessarily personally undertake all the duties associated

with the post, the ultimate responsibility for ensuring that they are properly performed remains with the individual CSO.

8.2 Prior to commencing the SSA, the CSO should ensure that advantage is taken of in‐ formation available on the assessment of threat for the ports at which the ship will call or at which passengers embark or disembark and about the port facilities and their protective meas‐ ures. The CSO should study previous reports on similar security needs. Where feasible, the CSO should meet with appropriate persons on the ship and in the port facilities to discuss the purpose and methodology of the assessment. The CSO should follow any specific guidance offered by the Contracting Governments.

8.3 A SSA should address the following elements on board or within the ship‐‐

.1 physical security;

.2 structural integrity;

.3 personnel protection systems;

.4 procedural policies;

.5 radio and telecommunication systems, including computer systems and net‐ works; and

.6 other areas that may, if damaged or used for illicit observation, pose a risk to persons, property, or operations on board the ship or within a port facility.

8.4 Those involved in conducting a SSA should be able to draw upon expert assistance in relation to‐

. 1 knowledge of current security threats and patterns;

.2 recognition and detection of weapons, dangerous substances and devices;

.3 recognition, on a non‐discriminatory basis of characteristics and behavioural patterns of persons who are likely to threaten security;

.4 techniques used to circumvent security measures;

.5 methods used to cause a security incident;

.6 effects of explosives on ship’s structures and equipment;

.7 ship security;

.8 ship/port interface business practices;

.9 contingency planning, emergency preparedness and response;

.10 physical security;

.11 radio and telecommunications systems, including computer systems and networks;

.12 marine engineering; and

.13 ship and port operations.

8.5 The CSO should obtain and record the information required to conduct an assess‐ ment, including‐

.1 the general layout of the ship;

.2 the location of areas which should have restricted access, such as navigation bridge, machinery spaces of category A and other control stations as defined in Chapter 1‐2, etc.;

.3 the location and function of each actual or potential access point to the ship;

.4 changes in the tide which may have an impact on the vulnerability or security of the ship;

.5 the cargo spaces and stowage arrangements;

.6 the locations where the ship’s stores and essential maintenance equipment is stored;

.7 the locations where unaccompanied baggage is stored;

.8 the emergency and stand‐by equipment available to maintain essential services;

.9 the number of ship’s personnel, any existing security duties and any existing training requirement practises of the Company;

.10 existing security and safety equipment for the protection of passengers and ship’s personnel;

.11 escape and evacuation routes and assembly stations which have to be main‐ tained to ensure the orderly and safe emergency evacuation of the ship;

.12 existing agreements with private security companies providing ship/water‐side security services; and

.13 existing security measures and procedures in effect, including inspection and, control procedures, identification systems, surveillance and monitoring equip‐ ment, personnel identification documents and communication, alarms, lighting, access control and other appropriate systems.

8.6 The SSA should examine each identified point of access, including open weather decks, and evaluate its potential for use by individuals who might seek to breach security. This includes points of access available to individuals having legitimate access as well as those who seek to obtain unauthorised entry.

8.7 The SSA should consider the continuing relevance of the existing security measures and guidance, procedures and operations, under both routine and emergency conditions, and should determine security guidance including‐

. 1 the restricted areas;

.2 the response procedures to fire or other emergency conditions;

.3 the level of supervision of the ship’s personnel, passengers, visitors, vendors, repair technicians, dock workers, etc.;

.4 the frequency and effectiveness of security patrols;

.5 the access control systems, including identification systems;

.6 the security communications systems and procedures;

.7 the security doors, barriers and lighting; and

.8 the security and surveillance equipment and systems, if any.

8.8 The SSA should consider the persons, activities, services and operations that it is

important to protect. This includes‐

.1 the ship’s personnel;

.2 passengers, visitors, vendors, repair technicians, port facility personnel, etc.;

.3 the capacity to maintain safe navigation and emergency response;

.4 the cargo, particularly dangerous goods or hazardous substances;

.5 the ship’s stores;

.6 the ship security communication equipment and systems, if any; and

.7 the ship’s security surveillance equipment and systems, ifany.

8.9 The SSA should consider all possible threats, which may include the following types of security incidents‐

.1 damage to, or destruction of, the ship or of a port facility, e.g. by explosive devices, anon, sabotage or vandalism;

.2 hijacking or seizure of the ship or of persons on board;

.3 tampering with cargo, essential ship equipment or systems or ship’s stores;

.4 unauthorised access or use, including presence of stowaways;

.5 smuggling weapons or equipment, including weapons of mass destruction;

.6 use of the ship to carry those intending to cause a security incident and/or their equipment;

.7 use of the ship itself as a weapon or as a means to cause damage or destruction;

.8 attacks from seaward whilst at berth or at anchor; and

.9 attacks whilst at sea.

8.10 The SSA should take into account all possible vulnerabilities, which may include‐

. 1 conflicts between safety and security measures;

.2 conflicts between shipboard duties and security assignments;

.3 watchkeeping duties, number of ship’s personnel, particularly with implica‐ tions on crew fatigue, alertness and performance;

.4 any identified security training deficiencies; and

.5 any security equipment and systems, including communication systems.

8.11 The CSO and ship security officer (SSO) should always have regard to the effect that security measures may have on ship’s personnel who will remain on the ship for long periods. When developing security measures, particular consideration should be given to the convenience, comfort and personal privacy of the ship’s personnel and their ability to main‐ tain their effectiveness over long periods.

8.12 Upon completion of the SS A, a report shall be prepared, consisting of a summary of how the assessment was conducted, a description of each vulnerability found during the assessment and a description of countermeasures that could be used to address each vulner‐ ability. The report shall be protected from unauthorised access or disclosure.

8.13 If the SSA has not been carried out by the Company, the report of the SSA should be reviewed and accepted by the CSO.

On‐scene security survey

8.14 The on‐scene security survey is an integral part of any SSA. The on‐scene security survey should examine and evaluate existing shipboard protective measures, procedures and operations for‐

.1 ensuring the performance of all ship security duties;

.2 monitoring restricted areas to ensure that only authorised persons have access;

.3 controlling access to the ship, including any identification systems;

.4 monitoring of deck areas and areas surrounding the ship;

.5 controlling the embarkation of persons and their effects (accompanied and un‐ accompanied baggage and ship’s personnel personal effects);

.6 supervising the handling of cargo and the delivery of ship’s stores; and

.7 ensuring that ship security communication, information, and equipment are readily available.

9. SHIP SECURlTY PLAN

General

9.1 The company security officer (CSO) has the responsibility of ensuring that a ship security plan (SSP) is prepared and submitted for approval. The content of each individual SSP should vary depending on the particular ship it covers. The ship security assessment (SSA) will have identified the particular features of the ship and the potential threats and vul‐ nerabiIities. The preparation of the SPP will require these features to be addressed in detail. Administrations may prepare advice on the preparation and content of a SSP.

9.2 All SSPs should‐

.1 detail the organisational structure of security for the ship;

.2 detail the ship’s relationships with the Company, port facilities, other ships and relevant authorities with security responsibility;

.3 detail the communication systems to allow effective continuous communica‐ tion within the ship and between the ship and others, including port facilities;

.4 detail the basic security measures for security level I, both operational and physical, that will always be in place;

.5 detail the additional security measures that will allow the ship to progress without delay to security level 2 and, when necessary, to security level 3;

.6 provide for regular review, or audit, of the SSP and for its amendment in re‐ sponse to experience or changing circumstances; and

.7 detail reporting procedures to the appropriate Contracting Government’s con‐ tact points.

9.3 Preparation of an effective SSP should rest on a thorough assessment of all issues than relate to the security of the ship, including, in particular, a thorough appreciation of the physical and operational characteristics, including the voyage pattern, of the individual ship.

9.4 All SSPs should be approved by, or on behalf of, the Administration. If an Admini‐ stration uses a recognised security organisation (RSO) to review or approve the SSP, that RSO should not be associated with any other RSO that prepared, or assisted in the preparation of, the plan.

9.5 CSOs and SSOs should develop procedures to‐‐

.1 assess the continuing effectiveness of the SSP; and

.2 prepare amendments of the plan subsequent to its approval.

9.6 The security measures included in the SSP should be in place when the initial verifi‐ cation for compliance with the requirements of Chapter XI‐2 and Part A of this Code will be carried out. Otherwise the process of issue to the ship of the required International Ship Secu‐ rity Certificate cannot be carried out. If there is any subsequent failure of security equipment or systems, or suspension of a security measure for whatever reason, equivalent temporary security measures should be adopted, notified to, and agreed by the Administration.

Organisation and performance of ship security duties

9.7 In addition to the guidance given in paragraph 9.2, the SSP should establish the fol‐ lowing, which relate to all security levels‐

.1 the duties and responsibilities of all shipboard personnel with a security role;

.2 the procedures or safeguards necessary to allow such continuous communica‐ tions to be maintained at all times;

.3 the procedures needed to assess the continuing effectiveness of security proce‐ dures and any security and surveillance equipment and systems, including pro‐ cedures for identifying and responding to equipment or systems failure or malfunction;

.4 the procedures and practices to protect security‐sensitive information held in paper or electronic format;

.5 the type and maintenance requirements of security and surveillance equipment and systems, if any;

.6 the procedures to ensure the timely submission, and assessment, of reports re‐ lating to possible breaches of security or security concerns; and

.7 procedures to establish, maintain and update an inventory of any dangerous goods or hazardous substances carried on board, including their location.

9.8 The remainder of section 9 addresses specifically the security measures that could be taken at each security level covering‐

.1 access to the ship by ship’s personnel, passengers, visitors, etc.;

.2 restricted areas on the ship;

.3 handling of cargo;

.4 delivery of ship’s stores;

.5 handling unaccompanied baggage; and

.6 monitoring the security of the ship.

Access to the ship

9.9 The SSP should establish the security measures covering all means of access to the ship identified in the SSA. This should include any‐

. 1 access ladders;

.2 access gangways;

.3 access ramps;

.4 access doors, sidescuttles, windows and ports;

.5 mooring lines and anchor chains; and

.6 cranes and hoisting gear.

9.10 For each of these the SSP should identify the appropriate locations where access restrictions or prohibitions should be applied for each of the security levels. For each security level the SSP should establish the type of restriction or prohibition to be applied and the means of enforcing them.

9.11 The SSP should establish for each security level the means of identification re‐ quired to allow access to the ship and for individuals to remain on the ship without challenge. This may involve developing an appropriate identification system allowing for permanent and temporary identifications, for ship’s personnel and visitors respectively. Any ship identifica‐ tion system should, when it is practicable to do so, be co‐ordinated with that applying to the port facility. Passengers should be able to prove their identity by boarding passes, tickets, etc., but should not be permitted access to restricted areas unless supervised. The SSP should es‐ tablish provisions to ensure that the identification systems are regularly updated, and that abuse of procedures should be subject to disciplinary action.

9.12 Those unwilling or unable to establish their identity and/or to confirm the purpose of their visit when requested to do so should be denied access to the ship and their attempt to obtain access should be reported, as appropriate, to the SSO, the CSO, the port facility secu‐ rity officer (PFSO) and to the national or local authorities with security responsibilities.

9.13 The SSP should establish the frequency of application of any access controls, par‐ ticularly if they are to be applied on a random, or occasional, basis.

Security level 1

9.14 At security level 1, the SSP should establish the security measures to control access to the ship, where the following may be applied‐

.1 checking the identity of all persons seeking to board the ship and confirming the reasons for doing so by checking, for example, joining instructions, passen‐ ger tickets, boarding passes, work orders, etc.;

.2 in liaison with the port facility, the ship should ensure that designated secure areas are established in which inspections and searching of persons, baggage (including carry‐on items), personal effects, vehicles and their contents can take place;

.3 in liaison with the port facility, the ship should ensure that vehicles destined to be loaded on board car carriers, ro‐ro and other passenger ships are subjected search prior to loading, in accordance with the frequency required in the SSP;

.4 segregating checked persons and their personal effects from unchecked persons and their personal effects;

.5 segregating embarking from disembarking passengers;

.6 identifying access points that should be secured or attended to prevent unau‐ thorised access;

.7 securing, by locking or other means, access to unattended spaces adjoining areas to which passengers and visitors have access; and

.8 providing security briefings to all ship personnel on possible threats, the proce‐ dures for reporting suspicious persons, objects or activities and the need for vigilance.

9.15 At security level 1, all those seeking to board a ship should be liable to search. The frequency of such searches, including random searches, should be specified in the approved SSP and should be specifically approved by the Administration. Such searches may best be undertaken by the port facility in close co‐operation with the ship and in close proximity to it. Unless there are clear security grounds for doing so, members of the ship’s personnel should not be required to search their colleagues or their personal effects. Any such search shall be undertaken in a manner which fully takes into account the human rights of the individual and preserves their basic human dignity.

Security level 2

9.16 At security level 2, the SSP should establish the security measures to be applied to protect against a heightened risk of a security incident to ensure higher vigilance and tighter control, which may include‐

.1 assigning additional personnel to patrol deck areas during silent hours to deter unauthorised access;

.2 limiting the number of access points to the ship, identifying those to be closed and the means of adequately securing them;

.3 deterring waterside access to the ship, including, for example, in liaison with the port facility, provision of boat patrols;

.4 establishing a restricted area on the shore side of the ship, in close co‐operation with the port facility;

.5 increasing the frequency and detail of searches of persons, personal effects, and vehicles being embarked or loaded onto the ship;

.6 escorting visitors on the ship;

.7 providing additional specific security briefings to all ship personnel on any identified threats, re‐emphasising the procedures for reporting suspicious per‐ sons, objects, or activities and stressing the need for increased vigilance; and

.8 carrying out a full or partial search of the ship.

Security level 3

9.17 At security level 3, the ship should comply with the instructions issued by those re‐ sponding to the security incident or threat thereof. The SSP should detail the security meas‐ ures which could be taken by the ship, in close co‐operation with those responding and the port facility, which may include‐

.1 limiting access to a single, controlled, access point;

.2 granting access only to those responding to the security incident or threat thereof;

.3 directing persons on board;

.4 suspension of embarkation or disembarkation;

.5 suspension of cargo handling operations, deliveries, etc.;

.6 evacuation of the ship;

.7 movement of the ship; and

.8 preparing for a full or partial search of the ship.

Restricted areas on the ship

9.18 The SSP should identify the restricted areas to be established on the ship, specify their extent, times of application, the security measures to be taken to control access to them and those to be taken to control activities within them. The purposes of restricted areas are to−

.1 prevent unauthorised access;

.2 protect passengers, ship’s personnel, and personnel from port facilities or other agencies authorised to be on board the ship;

.3 protect security‐sensitive areas within the ship; and

.4 protect cargo and ship’s stores from tampering.

9.19 The SSP should ensure that there are clearly established policies and practices to control access to all restricted areas.

9.20 The SSP should provide that all restricted areas should be clearly marked, indicat‐ ing that access to the area is restricted and that unauthorised presence within the area consti‐ tutes a breach of security.

9.21 Restricted areas may include‐

. 1 navigation bridge, machinery spaces of category A and other control stations as defined in Chapter 11‐2;

.2 spaces containing security and surveillance equipment and systems and their controls and lighting system controls;

.3 ventilation and air‐conditioning systems and other similar spaces;

.4 spaces with access to potable water tanks, pumps, or manifolds;

.5 spaces containing dangerous goods or hazardous substances;

.6 spaces containing cargo pumps and their controls;

.7 cargo spaces and spaces containing ship’s stores;

.8 crew accommodation; and

.9 any other areas as determined by the CSO, through the SSA, to which access must be restricted to maintain the security of the ship.

Security level 1

9.22 At security level I, the SSP should establish the security measures to be applied to restricted areas, which may include‐

∙ 1 locking or securing access points;

.2 using surveillance equipment to monitor the areas;

.3 using guards or patrols; and

.4 using automatic intrusion‐detection devices to alert the ship’s personnel of un‐ authorised access.

Security level 2

9.23 At security level 2, the frequency and intensity of the monitoring of, and control of access to, restricted areas should be increased to ensure that only authorised persons have access. The SSP should establish the additional security measures to be applied, which may include‐

∙ 1 establishing restricted areas adjacent to access points;

.2 continuously monitoring surveillance equipment; and

.3 dedicating additional personnel to guard and patrol restricted areas.

Security level 3

9.24 At security level 3, the ship should comply with the instructions issued by those re‐ sponding to the security incident or threat thereof. The SSP should detail the security meas‐ ures which could be taken by the ship, in close co‐operation with those responding and the port facility, which may include‐

∙ 1 setting up of additional restricted areas on the ship in proximity to the security incident, or the believed location of the security threat, to which access is de‐ nied; and

.2 searching of restricted areas as part of a search of the ship.

Handling of cargo

9.25 The security measures relating to cargo handling should‐

.1 prevent tampering; and

.2 prevent cargo that is not meant for carriage from being accepted and stored on board the ship.

9.26 The security measures, some of which way have to be applied in liaison with the port facility, should include inventory control procedures at access points to the ship. Once on board the ship, cargo should be capable of being identified as having been approved for load‐ ing onto the ship. In addition, security measures should be developed to ensure that cargo, once on board, is not tampered with.

Security level 1

9.27 At security level 1, the SSP should establish the security measures to be applied during cargo handling, which may include‐

.1 routine checking of cargo, cargo transport units and cargo spaces prior to, and during, cargo handling operations;

.2 checks to ensure that cargo being loaded matches the cargo documentation;

.3 ensuring, in liaison with the port facility, that vehicles to be loaded on board car carriers, ro‐ro and passenger ships are subjected to search prior to loading, in accordance with the frequency required in the SSP; and

.4 checking of seals or other methods used to prevent tampering.

9.28 Checking of cargo may be accomplished by the following means‐

.1 visual and physical examination; and

.2 using scanning/detection equipment, mechanical devices, or dogs.

9.29 When there are regular or repeated cargo movements, the CSO or SSO may, in consultation with the port facility, agree arrangements with shippers or others responsible for such cargo covering off‐site checking, sealing, scheduling, supporting documentation, etc. Such arrangements should be communicated to and agreed with the PFSO concerned.

Security level 2

9.30 At security level 2, the SSP should establish the additional security measures to be applied during cargo handling, which may include‐

.1 detailed checking of cargo, cargo transport units and cargo spaces;

.2 intensified checks to ensure that only the intended cargo is loaded;

.3 intensified searching of vehicles to be loaded on car carriers, ro‐ro and passen‐ ger ships; and

.4 increased frequency and detail in checking of seals or other methods used to prevent tampering.

9.31 Detailed checking of cargo may be accomplished by the following means‐

.1 increasing the frequency and detail of visual and physical examination;

.2 increasing the frequency of the use of scanning/detection equipment, mechani‐ cal devices, or dogs; and

.3 co‐ordinating enhanced security measures with the shipper or other responsible party in accordance with an established agreement and procedures.

Security level 3

9.32 At security level 3, the ship should comply with the instructions issued by those re‐ sponding to the security incident or threat thereof. The SSP should detail the security meas‐ ures which could be taken by the ship, in close co‐operation with those responding and the port facility, which may include‐

.1 suspending the loading or unloading of cargo; and

.2 veri tying the inventory of dangerous goods and hazardous substances carried on board, if any, and their location.

Delivery of ship’s stores

9.33 The security measures relating to the delivery of ship’s stores should‐

.1 ensure checking of ship’s stores and package integrity;

.2 prevent ship’s stores from being accepted without inspection;

.3 prevent tampering; and

.4 prevent ship’s stores from being accepted unless ordered.

9.34 For ships regularly using the port facility, it may be appropriate to establish proce‐ dures involving the ship, its suppliers and the port facility covering notification and timing of deliveries and their documentation. There should always be some way of confirming that stores presented for delivery are accompanied by evidence that they have been ordered by the ship.

Security level 1

9.35 At security level 1, the SSP should establish the security measures to be applied during delivery of ship’s stores, which may include‐

. 1 checking to ensure stores match the order prior to being loaded on board; and

.2 ensuring immediate secure stowage of ship’s stores.

Security level 2

9.36 At security level 2, the SSP should establish the additional security measures to be applied during delivery of ship’s stores by exercising checks prior to receiving stores on board and intensifying inspections.

Security level 3

9.37 At security level 3, the ship should comply with the instructions issued by those re‐ sponding to the security incident or threat thereof. The SSP should detail the security meas‐ ures which could be taken by the ship, in close co‐operation with those responding and the port facility, which may include‐

.1 subjecting ship’s stores to more extensive checking;

.2 preparation for restriction or suspension of handling of ship’s stores; and

.3 refusal to accept ship’s stores on board the ship.

Handling unaccompanied baggage

9.38 The SSP should establish the security measures to be applied to ensure that unac‐ companied baggage (i.e. any baggage, including personal effects, which is not with the pas‐ senger or member of ship’s personnel at the point of inspection or search) is identified and subjected to appropriate screening, including searching, before it is accepted on board the ship. It is not envisaged that such baggage will be subjected to screening by both the ship and the port facility, and in cases where both are suitably equipped, the responsibility for screen‐ ing should rest with the port facility. Close co‐operation with the port facility is essential and steps should be taken to ensure that unaccompanied baggage is handled securely after screening.

Security level 1

9.39 At security level 1, the SSP should establish the security measures to be applied while handling unaccompanied baggage to ensure that unaccompanied baggage is screened or searched up to and including 100 percent, which may include use of x‐ray screening.

Security level 2

9.40 At security level 2, the SSP should establish the additional security measures to be applied when handling unaccompanied baggage, which should include 100 percent x‐ray screening of all unaccompanied baggage.

Security level 3

9.41 At security level 3, the ship should comply with the instructions issued by those re‐ sponding to the security incident or threat thereof. The SSP should detail the security meas‐ ures which could be taken by the ship, in close co‐operation with those responding and the port facility, which may include‐

.1 subjecting such baggage to more extensive screening, for example x‐raying from at least two different angles;

.2 preparation for restriction or suspension of handling of unaccompanied bag‐ gage; and

.3 refusal to accept unaccompanied baggage on board the ship.

Monitoring the security of the ship

9.42 The ship should have the capability to monitor the ship, the restricted areas on board and areas surrounding the ship. Such monitoring capabilities may include use of‐

.1 lighting;

.2 watchkeepers, security guards and deck watches, including patrols; and

.3 automatic intrusion‐detection devices and surveillance equipment.

9.43 When used, automatic intrusion‐detection devices should activate an audible and/or visual alarm at a location that is continuously attended or monitored.

9.44 The SSP should establish the procedures and equipment needed at each security level and the means of ensuring that monitoring equipment will be able to perform continu‐ ally, including consideration of the possible effects of weather conditions or of power disruptions.

Security level 1

9.45 At security level 1, the SSP should establish the security measures to be applied, which may be a combination of lighting, watch keepers, security guards or use of security and surveillance equipment to allow ship’s security personnel to observe the ship in general, and barriers and restricted areas in particular.

9.46 The ship’s deck and access points to the ship should be illuminated during hours of darkness and periods of low visibility while conducting ship/port interface activities or at a port facility or anchorage when necessary, While under way, when necessary, ships should use the maximum lighting available consistent with safe navigation, having regard to the pro‐ visions of the International Regulations for the Prevention of Collisions at Sea in force. The following should be considered when establishing the appropriate level and location of lighting−

.1 the ship’s personnel should be able to detect activities beyond the ship, on both the shore‐side and the water‐side;

.2 coverage should include the area on and around the ship;

.3 coverage should facilitate personnel identification at access points; and

.4 coverage may be provided through co‐ordination with the port facility.

Security level 2

9.47 At security level 2, the SSP should establish the additional security measures to be applied to enhance the monitoring and surveillance capabilities, which may include‐

.1 increasing the frequency and detail of security patrols;

.2 increasing the coverage and intensity of lighting or the use of security and sur‐ veillance equipment;

.3 assigning additional personnel as security look‐outs; and

.4 ensuring co‐ordination with water‐side boat patrols, and foot or vehicle patrols on the shore‐side, when provided.

9.48 Additional lighting may be necessary to protect against a heightened risk of a secu‐ rity incident. When necessary, the additional lighting requirements may be accomplished by co‐ordinating with the port facility to provide additional shoreside lighting.

Security level 3

9.49 At security level 3, the ship should comply with the instructions issued by those re‐ sponding to the security incident or threat thereof. The SSP should detail the security meas‐ ures which could be taken by the ship, in close co‐operation with those responding and the port facility, which may include‐

.1 switching on of all lighting on, or illuminating the vicinity of, the ship;

.2 switching on of all on‐board surveillance equipment capable of recording ac‐ tivities on, or in the vicinity of, the ship;

.3 maximising the length of time such surveillance equipment can continue record;

.4 preparation for underwater inspection of the hull of the ship; and

.5 initiation of measures, including the slow revolution of the ship’s propellers, practicable, to deter underwater access to the hull of the ship.

Differing security levels

9.50 The SSP should establish details of the procedures and security measures the ship could adopt ifthe ship is at a higher security level than that applying to a port facility.

Activities not covered by the Code

9.51 The SSP should establish details of the procedures and security measures the ship should apply when−

.1 it is at a port of a State which is not a Contracting‐Government;

.2 it is interfacing with a ship to which this Code does not apply;

.3 it is interfacing with fixed or floating platforms or a mobile drilling unit on location; or

.4 it is interfacing with a port or port facility which is not required to comply with Chapter XI‐2 and Part A of this Code.

Declarations of Security

9.52 The SSP should detail how requests for Declarations of Security from a port facil‐ ity will be handled and the circumstances under which the ship itself should request a DoS.

Audit and review

9.53 The SSP should establish how the CSO and the SSO intend to audit the continue effectiveness of the SSP and the procedure to be followed to review, update or amend the SSP.

10. RECORDS

General

10.1 Records should be available to duly authorised officers of Contracting Govern‐ ments to verify that the provisions of ship security plans are being implemented.

10.2 Records may be kept in any format but should be protected from unauthorised access or disclosure.

11. COMPANY SECURITY OFFICER

Relevant guidance is provided under sections 8, 9 and 13.

12. SHIP SECURITY OFFICER

Relevant guidance is provided under sections 8, 9 and 13.

13. TRAINING, DRILLS AND EXERCISES ON SHIP SECURITY

Training

13.1 The company security officer (CSO) and appropriate shore‐based Company per‐ sonnel, and the ship security officer (SSO), should have knowledge of, and receive training, in some or all of the following, as appropriate‐

.1 security administration;

.2 relevant international conventions, codes and recommendations;

.3 relevant Government legislation and regulations;

.4 responsibilities and functions of other security organisations;

.5 methodology of ship security assessment;

.6 methods of ship security surveys and inspections;

.7 ship and port operations and conditions;

.8 ship and port facility security measures;

.9 emergency preparedness and response and contingency planning;

.10 instruction techniques for security training and education, including security measures and procedures;

.11 handling sensitive security‐related information and security‐related communications;

.12 knowledge of current security threats and patterns;

.13 recognition and detection of weapons, dangerous substances and devices;

.14 recognition, on a non‐discriminatory basis, of characteristics and behavioural patterns of persons who are likely to threaten security;

.15 techniques used to circumvent security measures;

.16 security equipment and systems and their operational limitations;

.17 methods of conducting audits, inspection, control and monitoring;

.18 methods of physical searches and non‐intrusive inspections;

.19 security drills and exercises, including drills and exercises with port facilities; and

.20 assessment of security drills and exercises.

13.2 In addition, the SSO should have adequate knowledge of, and receive training in, some or all of the following, as appropriate‐

.1 the layout of the ship;

.2 the ship security plan and related procedures (including scenario‐based training on how to respond);

.3 crowd management and control techniques;

.4 operations of security equipment and systems; and

.5 testing, calibration and at‐sea maintenance of security equipment and systems.

13.3 Shipboard personnel having specific security duties should have sufficient knowl‐ edge and ability to perform their assigned duties, including, as appropriate‐

.1 knowledge of current security threats and patterns;

.2 recognition and detection of weapons, dangerous substances and devices;

.3 recognition of characteristics and behavioural patterns of persons who are likely to threaten security;

.4 techniques used to circumvent security measures;

.5 crowd management and control techniques;

.6 security‐related communications;

.7 knowledge of the emergency procedures and contingency plans;

.8 operations of security equipment and systems;

.9 testing, calibration and at‐sea maintenance of security equipment and systems;

.10 inspection, control, and monitoring techniques; and

. 11methods of physical searches of persons, personal effects, baggage, cargo, and ship’s stores.

13.4 All other shipboard personnel should have sufficient knowledge of and be familiar with relevant provisions of the ship security plan (SSP), including‐

.1 the meaning and the consequential requirements of the different security levels;

.2 knowledge of the emergency procedures and contingency plans;

.3 recognition and detection of weapons, dangerous substances and devices;

.4 recognition, on a non‐discriminatory basis, of characteristics and behavioural patterns of persons who are likely to threaten security; and

.5 techniques used to circumvent security measures.

Drills and exercises

13.5 The objective of drills and exercises is to ensure that shipboard personnel are profi‐ cient in all assigned security duties at all security levels and the identification of any security‐ related deficiencies which need to be addressed.

13.6 To ensure the effective implementation of the provisions of the ship security plan, drills should be conducted at least once every three months. In addition, in cases where more than 25 percent of the ship’s personnel has been changed, at anyone time, with personnel that has not previously participated in any drill on that ship within the last three months, a drill should be conducted within one week of the change. These drills should test individual ele‐ ments of the plan such as those security threats listed in paragraph 8.9.

13.7 Various types of exercises, which may include participation of company security officers, port facility security officers, relevant authorities of Contracting Governments as well as ship security officers, if available, should be carried out at least once each calendar

year with no more than 18 months between the exercises. These exercises should test commu‐ nications, co‐ordination, resource availability, and response. These exercises may be‐

.1 full‐scale or live;

.2 tabletop simulation or seminar; or

.3 combined with other exercises held, such as search and rescue or emergency response exercises.

13.8 Company participation in an exercise with another Contracting Government should be recognised by the Administration.

14. PORT FACILITY SECURITY

Relevant guidance is provided under sections 15, 16 and 18.

15. PORT FACILITY SECURITY ASSESSMENT

General

15.1 The port facility security assessment (PFSA) may be conducted by a recognised se‐ curity organisation (RSO). However, approval of a completed PFSA should only be given by the relevant Contracting Government.

15.2 If a Contracting Government uses a RSO to review or verify compliance of the PFSA, the RSO should not be associated with any other RSO that prepared or assisted in the preparation of that assessment.

15.3 A PFSA should address the following elements within a port facility‐

.1 physical security;

.2 structural integrity;

.3 personnel protection systems;

.4 procedural policies;

.5 radio and telecommunication systems, including computer systems and networks;

.6 relevant transportation infrastructure;

.7 utilities; and

.8 other areas that may, if damaged or used for illicit observation, pose a risk to persons, property, or operations within the port facility.

15.4 Those involved in a PFSA should be able to draw upon expert assistance in relation

to‐‐

.1 knowledge of current security threats and patterns;

.2 recognition and detection of weapons, dangerous substances and devices;

.3 recognition, on a non‐discriminatory basis, of characteristics and behavioural patterns of persons who are likely to threaten security;

.4 techniques used to circumvent security measures;

.5 methods used to cause a security incident;

.6 effects of explosives on structures and port facility services;

.7 port facility security;

.8 port business practices;

.9 contingency planning, emergency preparedness and response;

.10 physical security measures, e.g. fences;

.11 radio and telecommunications systems, including computer systems and networks;

.12 transport and civil engineering; and

.13 ship and port operations.

Identification and evaluation of important assets and infrastructure it is important to protect

15.5 The identification and evaluation of important assets and infrastructure is a process through which the relative importance of structures and installations to the functioning of the port facility can be established. This identification and evaluation process is important be‐ cause it provides a basis for focusing mitigation strategies on those assets and structures which it is more important to protect from a security incident. This process should take into account potential loss of life, the economic significance of the port, symbolic value, and the presence of Government installations.

15.6 Identification and evaluation of assets and infrastructure should be used to priori‐ tise their relative importance for protection. The primary concern should be avoidance of death or injury. It is also important to consider whether the port facility, structure or installa‐ tion can continue to function without the asset, and the extent to which rapid re‐establishment of normal functioning is possible.

15.7 Assets and infrastructure that should be considered important to protect may include−

.1 accesses, entrances, approaches, and anchorages, manoeuvring and berthing areas;

.2 cargo facilities, terminals, storage areas, and cargo handling equipment;

.3 systems such as electrical distribution systems, radio and telecommunication systems and computer systems and networks;

.4 port vessel traffic management systems and aids to navigation;

.5 power plants, cargo transfer piping, and water supplies;

.6 bridges, railways, roads;

.7 port service vessels, including pilot boats, tugs, lighters, etc.;

.8 security and surveillance equipment and systems; and

.9 the waters adjacent to the port facility.

15.8 The clear identification of assets and infrastructure is essential to the evaluation of the port facility’s security requirements, the prioritisation of protective measures, and deci‐ sions concerning the allocation of resources to better protect the port facility. The process may involve consultation with the relevant authorities relating to structures adjacent to the port facility which could cause damage within the facility or be used for the purpose of causing damage to the facility or for illicit observation of the facility or for diverting attention.

Identification of the possible threats to the assets and infrastructure and the likelihood of their occurrence, in order to establish and prioritise security measures

15.9 Possible acts that could threaten the security of assets and infrastructure, and the methods of carrying out those acts, should be identified to evaluate the vulnerability of a given asset or location to a security incident, and to establish and prioritise security requirements to enable planning and resource allocations. Identification and evaluation of each potential act and its method should be based on various factors, including threat assessments by Govern‐ ment agencies. By identifying and assessing threats, those conducting the assessment do not have to rely on worst‐case scenarios to guide planning and resource allocations.

15.10 The PFSA should include an assessment undertaken in consultation with the rele‐ vant national security organisations to determine‐

.1 any particular aspects of the port facility, including the vessel traffic using the facility, which make it likely to be the target of an attack;

.2 the likely consequences in terms of loss of life, damage to property and eco‐ nomic disruption, including disruption to transport systems, of an attack on, or at, the port facility;

.3 the capability and intent of those likely to mount such an attack; and

.4 the possible type, or types, of attack,

producing an overall assessment of the level of risk against which security measures have to be developed.

15.11 The PFSA should consider all possible threats, which may include the following types of security incidents−

.1 damage to, or destruction of, the port facility or of the ship, e.g. by explosive devices, arson, sabotage or vandalism;

.2 hijacking or seizure of the ship or of persons on board;

.3 tampering with cargo, essential ship equipment or systems or ship’s stores;

.4 unauthorised access or use, including presence of stowaways;

.5 smuggling weapons or equipment, including weapons of mass destruction;

.6 use of the ship to carry those intending to cause a security incident and their equipment;

.7 use of the ship itself as a weapon or as a means to cause damage or destruction;

.8 blockage of port entrances, locks, approaches, etc.; and

.9 nuclear, biological and chemical attack.

15.12 The process should involve consultation with the relevant authorities relating to structures adjacent to the port facility which could cause damage within the facility or be used for the purpose of causing damage to the facil ity or for illicit observation of the facility or for diverting attention.

Identification, selection, and prioritisation of counter‐measures and procedural changes and their level of effectiveness in reducing vulnerability

15.13 The identification and prioritisation of counter‐measures is designed to ensure that the most effective security measures are employed to reduce the vulnerability of a port facility of ship/port interface to the possible threats.

15.14 Security measures should be selected on the basis of factors such as whether they reduce the probability of an attack and should be evaluated using information that includes‐

.1 security surveys, inspections and audits;

.2 consultation with port facility owners and operators, and owners/operators of adjacent structures if appropriate;

.3 historical information on security incidents; and

.4 operations within the port facility.

Identification of vulnerabilities

15.15 Identification of vulnerabilities in physical structures, personnel protection sys‐ tems, processes, or other areas that may lead to a security incident can be used to establish options to eliminate or mitigate those vulnerabilities. For example, an analysis might reveal vulnerabilities in a port facility’s security systems or unprotected infrastructure such as water supplies, bridges, etc., that could be resolved through physical measures, e.g. permanent barri‐ ers, alarms, surveillance equipment, etc.

15.16 Identification of vulnerabilities should include consideration of‐

.1 water‐side and shore‐side access to the port facility and ships berthing at the facility;

.2 structural integrity of the piers, facilities, and associated structures;

.3 existing security measures and procedures, including identification systems;

.4 existing security measures and procedures relating to port services and utilities;

.5 measures to protect radio and telecommunication equipment, port services and utilities, including computer systems and networks;

.6 adjacent areas that may be exploited during, or for, an attack;

.7 existing agreements with private security companies providing water‐side/ shore‐side security services;

.8 any conflicting policies between safety and security measures and procedures;

.9 any conflicting port facility and security duty assignments;

.10 any enforcement and personnel constraints;

.11 any deficiencies identified during training and drills; and

.12 any deficiencies identified during daily operation, following incidents or alerts, the report of security concerns, the exercise of control measures, audits, etc.

16. PORT FACILITY SECURITY PLAN

General

16.1 Preparation of the port facility security plan (PFSP) is the responsibility of the port facility security officer (PFSO). While the PFSO need not necessarily personally undertake all the duties associated with the post, the ultimate responsibility for ensuring that they are prop‐ erly performed remains with the individual PFSO.

16.2 The content of each individual PFSP should vary depending on the particular cir‐ cumstances of the port facility, or facilities, it covers. The port facility security assessment (PFSA) will have identified the particular features of the port facility, and of the potential security risks, that have led to the need to appoint a PFSO and to prepare a PFSP. The prepa‐ ration of the PFSP will require these features, and other local or national security considera‐ tions, to be addressed in the PFSP and for appropriate security measures to be established so as to minimise the likelihood of a breach of security and the consequences of potential risks. Contracting Governments may prepare advice on the preparation and content ofa PFSP.

16.3 All PFSPs should‐

.1 detail the security organisation of the port facility;

.2 detail the organisation’s links with other relevant authorities and the necessary communication systems to allow the effective continuous operation of the or‐ ganisation and its links with others, including ships in port;

.3 detail the basic security level 1 measures, both operational and physical, that will be in place;

.4 detail the additional security measures that will allow the port facility to pro‐ gress without delay to security level 2 and, when necessary, to security level 3;

.5 provide for regular review, or audit, of the PFSP and for its amendment in re‐ sponse to experience or changing circumstances; and

.6 detail reporting procedures to the appropriate Contracting Government’s con‐ tact points.

16.4 Preparation of an effective PFSP will rest on a thorough assessment of all issues that relate to the security of the port facility, including, in particular, a thorough appreciation of the physical and operational characteristics of the individual port facility.

16.5 Contracting Governments should approve the PFSPs of the port facilities under their jurisdiction. Contracting Governments should develop procedures to assess the continu‐ ing effectiveness of each PFSP and may require amendment of the PFSP prior to its initial

approval or subsequent to its approval. The PFSP should make provision for the retention of records of security incidents and threats, reviews, audits, training, drills and exercises as evi‐ dence of compliance with those requirements.

16.6 The security measures included in the PFSP should be in place within a reasonable period of the PFSP’s approval and the PFSP should establish when each measure will be in place. If there is likely to be any delay in their provision, this should be discussed with the Contracting Government responsible for approval of the PFSP and satisfactory alternative temporary security measures that provide an equivalent level of security should be agreed to cover any interim period.

16.7 The use of firearms on or near ships and in port facilities may pose particular and significant safety risks, in particular in connection with certain dangerous or hazardous sub‐ stances, and should be considered very carefully. In the event that a Contracting Government decides that it is necessary to use armed personnel in these areas, that Contracting Govern‐ ment should ensure that these personnel are duly authorised and trained in the use of their weapons and that they are aware of the specific risks to safety that are present in these areas. If a Contracting Government authorises the use of firearms they should issue specific safety guidelines on their use. The PFSP should contain specific guidance on this matter, in particu‐ lar with regard its application to ships carrying dangerous goods or hazardous substances.

Organisation and performance of port facility security duties

16.8 In addition to the guidance given under paragraph 16.3, the PFSP should establish the following, which relate to all security levels‐

.1 the role and structure of the port facility security organisation;

.2 the duties, responsibilities and training requirements of all port facility person‐ nel with a security role and the performance measures needed to allow their in‐ dividual effectiveness to be assessed;

.3 the port facility security organisation’s links with other national or local au‐ thorities with security responsibilities;

.4 the communication systems provided to allow effective and continuous com‐ munication between port facility security personnel, ships in port and, when appropriate, with national or local authorities with security responsibilities;

.5 the procedures or safeguards necessary to allow such continuous communica‐ tions to be maintained at all times;

.6 the procedures and practices to protect security‐sensitive information held in paper or electronic format;

.7 the procedures to assess the continuing effectiveness of security measures, pro‐ cedures and equipment, including identification of, and response to, equipment failure or malfunction;

.8 the procedures to allow the submission, and assessment, of reports relating to possible breaches of security or security concerns;

.9 procedures relating to cargo handling;

.10 procedures covering the delivery of ship’s stores;

.11 the procedures to maintain, and update, records of dangerous goods and haz‐ ardous substances and their location within the port facility;

.12 the means of alerting and obtaining the services of waterside patrols and spe‐ cialist search teams, including bomb searches and underwater searches;

.13 the procedures for assisting ship security officers in confirming the identity of those seeking to board the ship when requested; and

.14 the procedures for facilitating shore leave for ship’s personnel or personnel changes, as well as access of visitors to the ship, including representatives of seafarers’ welfare and labour organisations.

16.9 The remainder of section 16 addresses specifically the security measures that could be taken at each security level covering‐

.1 access to the port facility;

.2 restricted areas within the port facility;

.3 handling of cargo;

.4 delivery of ship’s stores;

.5 handling unaccompanied baggage; and

.6 monitoring the security of the port facility.

Access to the port facility

16.10 The PFSP should establish the security measures covering all means of access to the port facility identified in the PFSA.

16.11 For each of these the PFSP should identify the appropriate locations where access restrictions or prohibitions should be applied for each of the security levels. For each security level the PFSP should specify the type of restriction or prohibition to be applied and the means of enforcing them.

16.12 The PFSP should establish for each security level the means of identification re‐ quired to allow access to the port facility and for individuals to remain within the port facility without challenge. This may involve developing an appropriate identification system, allow‐ ing for permanent and temporary identifications, for port facility personnel and for visitors respectively. Any port facility identification system should, when it is practicable to do so, be co‐ordinated with that applying to ships that regularly use the port facility. Passengers should be able to prove their identity by boarding passes, tickets, etc., but should not be permitted access to restricted areas unless supervised. The PFSP should establish provisions to ensure that the identification systems are regularly updated, and that abuse of procedures should be subject to disciplinary action.

16.13 Those unwilling or unable to establish their identity and/or to confirm the purpose of their visit when requested to do so should be denied access to the port facility and their attempt to obtain access should be reported to the PFSO and to the national or local authorities with security responsibilities.

16.14 The PFSP should identify the locations where persons, personal effects, and vehi‐ cle searches are to be undertaken. Such locations should be covered to facilitate continuous operation, regardless of prevailing weather conditions, in accordance with the frequency laid down in the PFSP. Once subjected to search, persons, personal effects and vehicles should proceed directly to the restricted holding, embarkation or car loading areas.

16.15 The PFSP should establish separate locations for checked and unchecked persons and their effects and if possible separate areas for embarking/disembarking passengers, ship’s

personnel and their effects to ensure that unchecked persons are not able to come in contact with checked persons.

16.16 The PFSP should establish the frequency of application of any access controls, particularly if they are to be applied on a random, or occasional, basis.

Security level 1

16.17 At security level 1, the PFSP should establish the control points where the follow‐ ing security measures may be applied−

. 1 restricted areas, which should be bounded by fencing or other barriers to a standard which should be approved by the Contracting Government;

.2 checking identity of all persons seeking entry to the port facility in connection with a ship, including passengers, ship’s personnel and visitors, and confirming their reasons for doing so by checking, for example, joining instructions, pas‐ senger tickets, boarding passes, work orders, etc.;

.3 checking vehicles used by those seeking entry to the port facility in connection with a ship;

.4 verification of the identity of port facility personnel and those employed within the port facility and their vehicles;

.5 restricting access to exclude those not employed by the port facility or working within it, if they are unable to establish their identity;

.6 undertaking searches of persons, personal effects, vehicles and their contents; and

.7 identification of any access points not in regular use, which should be perma‐ nently closed and locked.

16.18 At security level I, all those seeking access to the port facility should be liable to search. The frequency of such searches, including random searches, should be specified in the approved PFSP and should be specifically approved by the Contracting Government. Unless there are clear security grounds for doing so, members of the ship’s personnel should not be required to search their colleagues or their personal effects, Any such search shall be under‐ taken in a manner which fully takes into account the human rights of the individual and pre‐ serves their basic human dignity.

Security level 2

16.19 At security level 2, the PFSP should establish the additional security measures to be applied, which may include‐

.1 assigning additional personnel to guard access points and patrol perimeter barriers;

.2 limiting the number of access points to the port facility, and identifying those to be closed and the means of adequately securing them;

.3 providing for means of impeding movement through the remaining access points, e.g. security barriers;

.4 increasing the frequency of searches of persons, personal effects, and vehicles;

.5 denying access to visitors who are unable to provide a verifiable justification for seeking access to the port facility; and

.6 using patrol vessels to enhance water‐side security.

Security level 3

16.20 At security level 3, the port facility should comply with instructions issued by

those responding to the security incident or threat thereof. The PFSP should detail the security

measures which could be taken by the port facility, in close co‐operation with those respond‐ ing and the ships at the port facility, which may include‐

.1 suspension of access to all, or part, ofthe port facility;

.2 granting access only to those responding to the security incident or threat thereof;

.3 suspension of pedestrian or vehicular movement within all, or part, of the port facility;

.4 increased security patrols within the port facility, if appropriate;

.5 suspension of port operations within all, or part, of the port facility;

.6 direction of vessel movements relating to all, or part, of the port facility; and

.7 evacuation of all, or part, of the port facility.

Restricted areas within the port facility

16.21 The PFSP should identity the restricted areas to be established within the port fa‐ cility and specify their extent, times of application, the security measures to be taken to con‐ trol access to them and those to be taken to control activities within them. This should also include, in appropriate circumstances, measures to ensure that temporary restricted areas are security swept both before and after that area is established. The purpose of restricted areas is to−

.1 protect passengers, ship’s personnel, port facility personnel and visitors, in‐ cluding those visiting in connection with a ship;

.2 protect the port facility;

.3 protect ships using, and serving, the port facility;

.4 protect security‐sensitive locations and areas within the port facility;

.5 protect security and surveillance equipment and systems; and

.6 protect cargo and ship’s stores from tampering.

16.22 The PFSP should ensure that all restricted areas have clearly established security measures to control−

.1 access by individuals;

.2 the entry, parking, loading and unloading of vehicles;

.3 movement and storage of cargo and ship’s stores; and

.4 unaccompanied baggage or personal effects.

16.23 The PFSP should provide that all restricted areas should be clearly marked, indi‐ cating that access to the area is restricted and that unauthorised presence within the area con‐ stitutes a breach of security.

16.24 When automatic intrusion‐detection devices are installed they should alert a con‐ trol centre which can respond to the triggering of an alarm.

16.25 Restricted areas may include−

.1 shore‐ and water‐side areas immediately adjacent to the ship;

.2 embarkation and disembarkation areas, passenger and ship’s personnel holding and processing areas, including search points;

.3 areas where loading, unloading or storage of cargo and stores is undertaken;

.4 locations where security‐sensitive information, including cargo documentation, is held;

.5 areas where dangerous goods and hazardous substances are held;

.6 vessel traffic management system control rooms, aids to navigation and port control buildings, including security and surveillance control rooms;

.7 areas where security and surveillance equipment are stored or located;

.8 essential electrical, radio and telecommunication, water and other utility instal‐ lations; and

.9 other locations in the port facility where access by vessels, vehicles and indi‐ viduals should be restricted.

16.26 The security measures may extend, with the agreement of the relevant authorities, to restrictions on unauthorised access to structures from which the port facility can be observed.

Security level 1

16.27 At security level 1, the PFSP should establish the security measures to be applied to restricted areas, which may include−

.1 provision of permanent or temporary barriers to surround the restricted area, whose standard should be accepted by the Contracting Government;

.2 provision of access points where access can be controlled by security guards when in operation and which can be effectively locked or barred when not in use;

.3 providing passes which must be displayed to identify individual’s entitlement to be within the restricted area;

.4 clearly marking vehicles allowed access to restricted areas;

.5 providing guards and patrols;

.6 providing automatic intrusion‐detection devices, or surveillance equipment or systems to detect unauthorised access into, or movement within, restricted areas; and

.7 control of the movement of vessels in the vicinity of ships using the port facility.

Security level 2

16.28 At security level 2, the PFSP should establish the enhancement of the frequency and intensity of the monitoring of, and control of access to, restricted areas. The PFSP should establish the additional security measures, which may include‐

.1 enhancing the effectiveness of the barriers or fencing surrounding restricted areas, including the use of patrols or automatic intrusion‐detection devices;

.2 reducing the number of access points to restricted areas and enhancing the con‐ trols applied at the remaining accesses;

.3 restrictions on parking adjacent to berthed ships;

.4 further restricting access to the restricted areas and movements and storage within them;

.5 use of continuously monitored and recording surveillance equipment;

.6 enhancing the number and frequency of patrols, including water‐side patrols, undertaken on the boundaries of the restricted areas and within the areas;

.7 establishing and restricting access to areas adjacent to the restricted areas; and

.8 enforcing restrictions on access by unauthorised craft to the waters adjacent to ships using the port facility.

Security level 3

16.29 At security level 3, the port facility should comply with the instructions issued by those responding to the security incident or threat thereof. The PFSP should detail the security measures which could be taken by the port facility in close co‐operation with those responding and the ships at the port facility, which may include−

.1 setting up of additional restricted areas within the port facility in proximity to the security incident, or the believed location of the security threat, to which access is denied; and

.2 preparing for the searching of restricted areas as part of a search of all, or part, of the port facility.

Handling of cargo

16.30 The security measures relating to cargo handling should‐

.1 prevent tampering; and

.2 prevent cargo that is not meant for carriage from being accepted and stored within the port facility.

16.31 The security measures should include inventory control procedures at access points to the port facility. Once within the port facility, cargo should be capable of being iden‐ tified as having been checked and accepted for loading onto a ship or for temporary storage in a restricted area while awaiting loading. It may be appropriate to restrict the entry of cargo to the port facility that does not have a confirmed date for loading.

Security level 1

16.32 At security level I, the PFSP should establish the security measures to be applied during cargo handling, which may include−

.1 routine checking of cargo, cargo transport units and cargo storage areas within the port facility prior to, and during, cargo handling operations;

.2 checks to ensure that cargo entering the port facility matches the delivery note or equivalent cargo documentation;

.3 searches of vehicles; and

.4 checking of seals and other methods used to prevent tampering upon entering the port facility and upon storage within the port facility.

16.33 Checking of cargo may be accomplished by some or all of the following means‐

.1 visual and physical examination; and

.2 using scanning/detection equipment, mechanical devices, or dogs.

16.34 When there are regular or repeated cargo movements, the CSO or the SSO may, in consultation with the port facility, agree arrangements with shippers or others responsible for such cargo covering off‐site checking, sealing, scheduling, supporting documentation, etc. Such arrangements should be communicated to and agreed with the PFSO concerned.

Security level 2

16.35 At security level 2, the PFSP should establish the additional security measures to be applied during cargo handling to enhance control, which may include−

.1 detailed checking of cargo, cargo transport units and cargo storage areas within the port facility;

.2 intensified checks, as appropriate, to ensure that only the documented cargo enters the port facility, is temporarily stored there and is then loaded onto the ship;

.3 intensified searches of vehicles; and

.4 increased frequency and detail in checking of seals and other methods used to prevent tampering.

16.36 Detailed checking of cargo may be accomplished by some or all of the following means‐

.1 increasing the frequency and detail of checking of cargo, cargo transport units and cargo storage areas within the port facility (visual and physical examination);

.2 increasing the frequency of the use of scanning/detection equipment, mechani‐ cal devices, or dogs; and

.3 co‐ordinating enhanced security measures with the shipper or other responsible party in addition to an established agreement and procedures.

Security level 3

16.37 At security level 3, the port facility should comply with the instructions issued by those responding to the security incident or threat thereof. The PFSP should detail the security measures which could be taken by the port facility in close co‐operation with those responding and the ships at the port facility, which may include‐

.1 restriction or suspension of cargo movements or operations within all, or part, of the port facility or specific ships; and

.2 verifying the inventory of dangerous goods and hazardous substances held within the port facility and their location.

Delivery of ship’s stores

16.38 The security measures relating to the delivery of ship’s stores should‐

.1 ensure checking of ship’s stores and package integrity;

.2 prevent ship’s stores from being accepted without inspection;

.3 prevent tampering;

.4 prevent ships stores from being accepted unless ordered;

.5 ensure searching the delivery vehicle; and

.6 ensure escorting delivery vehicles within the port facility.

16.39 For ships regularly using the port facility it may be appropriate to establish proce‐ dures involving the ship, its suppliers and the port facility covering notification and timing of deliveries and their documentation. There should always be some way of confirming that stores presented for delivery are accompanied by evidence that they have been ordered by the ship.

Security level 1

16.40 At security level I, the PFSP should establish the security measures to be applied to control the delivery of ship’s stores, which may include−

.1 checking of ship’s stores;

.2 advance notification as to composition of load, driver details and vehicle regis‐ tration; and

.3 searching the delivery vehicle.

16.41 Checking of ship’s stores may be accomplished by some or all of the following

means−

.1 visual and physical examination; and

.2 using scanning/detection equipment, mechanical devices or dogs.

Security level 2

16.42 At security level 2, the PFSP should establish the additional security measures to be applied to enhance the control of the delivery of ship’s stores, which may include−

.1 detailed checking of ship’s stores;

.2 detailed searches of the delivery vehicles;

.3 co‐ordination with ship personnel to check the order against the delivery note prior to entry to the port facility; and

.4 escorting the delivery vehicle within the port facility.

16.43 Detailed checking of ship’s stores may be accomplished by some or all of the fol‐ lowing means−

.1 increasing the frequency and detail of searches of delivery vehicles;

.2 increasing the use of scanning/detection equipment, mechanical devices, or dogs; and

.3 restricting, or prohibiting, entry of stores that will not leave the port facility within a specified period.

Security level 3

16.44 At security level 3, the port facility should comply with the instructions issued by those responding to the security incident or threat thereof. The PFSP should detail the security measures which could be taken by the port facility, in close co‐operation with those respond‐ ing and the ships at the port facility, which may include preparation for restriction, or suspen‐ sion, ofthe delivery of ship’s stores within all, or part, of the port facility.

Handling unaccompanied baggage

16.45 The PFSP should establish the security measures to be applied to ensure that un‐ accompanied baggage (i.e. any baggage, including personal effects, which is not with the pas‐ senger or member of ship’s personnel at the point of inspection or search) is identified and subjected to appropriate screening, including searching, before is allowed in the port facility and, depending on the storage arrangements, before it is transferred between the port facility and the ship. It is not envisaged that such baggage will be subjected to screening by both the port facility and the ship, and in cases where both are suitably equipped, the responsibility for screening should rest with the port facility. Close co‐operation with the ship is essential and steps should be taken to ensure that unaccompanied baggage is handled securely after screen‐ ing.

Security level 1

16.46 At security level 1, the PFSP should establish the security measures to be applied when handling unaccompanied baggage to ensure that unaccompanied baggage is screened or searched up to and including 300 percent, which may include use of x‐ray screening.

Security level 2

16.47 At security level 2, the PFSP should establish the additional security measures to be applied when handling unaccompanied baggage which should include 100 percent x‐ray screening of all unaccompanied baggage.

Security level 3

16.48 At security level 3, the port facility should comply with the instructions issued by those responding to the security incident or threat thereof. The PFSP should detail the security measures which could be taken by the port facility in close co‐operation with those responding and the ships at the port facility, which may include−

.1 subjecting such baggage to more extensive screening, for example x‐raying it from at least two different angles;

.2 preparations for restriction or suspension of handling of unaccompanied bag‐ gage; and

.3 refusal to accept unaccompanied baggage into the port facility.

Monitoring the security of the port facility

16.49 The port facility security organisation should have the capability to monitor the port facility and its nearby approaches, on land and water, at all times, including the night hours and periods of limited visibility, the restricted areas within the port facility, the ships at the port facility and areas surrounding ships. Such monitoring can include use of‐

.1 lighting;

.2 security guards, including foot, vehicle and waterbome patrols; and

.3 automatic intrusion‐detection devices and surveillance equipment.

16.50 When used, automatic intrusion‐detection devices should activate an audible and/or visual alarm at a location that is continuously attended or monitored.

16.51 The PFSP should establish the procedures and equipment needed at each security level and the means of ensuring that monitoring equipment will be able to perform continu‐ ally, including consideration ofthe possible effects of weather or of power disruptions.

Security level 1

16.52 At security level I, the PFSP should establish the security measures to be applied, which may be a combination of lighting, security guards or use of security and surveillance equipment to allow port facility security personnel to−

.1 observe the general port facility area, including shore‐ and water‐side accesses to it;

.2 observe access points, barriers and restricted areas; and

.3 allow port facility security personnel to monitor areas and movements adjacent to ships using the port facility, including augmentation of lighting provided by the ship itself.

Security level 2

16.53 At security level 2, the PFSP should establish the additional security measures to be applied to enhance the monitoring and surveillance capability, which may include−

.1 increasing the coverage and intensity of lighting and surveillance equipment, including the provision of additional lighting and surveillance coverage;

.2 increasing the frequency of foot, vehicle or waterborne patrols; and

.3 assigning additional security personnel to monitor and patrol.

Security level 3

16.54 At security level 3, the port facility should comply with the instructions issued by those responding to the security incident or threat thereof. The PFSP should detail the security measures which could be taken by the port facility in close co‐operation with those responding and the ships at the port facility, which may include−

.1 switching on all lighting within, or illuminating the vicinity of, the port facility;

.2 switching on all surveillance equipment capable of recording activities within, or adjacent to, the port facility; and

.3 maximising the length of time such surveillance equipment can continue to record.

Differing security levels

16.55 The PFSP should establish details of the procedures and security measures the port facility could adopt if the port facility is at a lower security level than that applying to a ship.

Activities not covered by the Code

16.56 The PFSP should establish details of the procedures and security measures the port facility should apply when‐

.1 it is interfacing with a ship which has been at a port of a State which is not a Contracting Government;

.2 it is interfacing with a ship to which this Code does not apply; and

.3 it is interfacing with fixed or floating platforms or mobile offshore drilling units on location.

Declarations of Security

16.57 The PFSP should establish the procedures to be followed when, on the instruc‐ tions of the Contracting Government the PFSO requests a Declaration of Security (DoS) or when a DoS is requested by a ship.

Audit, review and amendment

16.58 The PFSP should establish how the PFSO intends to audit the continued effec‐ tiveness of the PFSP and the procedure to be followed to review, update or amend the PFSP.

16.59 The PFSP should be reviewed at the discretion of the PFSO. In addition it should be reviewed−

.1 if the PFSA relating to the port facility is altered;

.2 if an independent audit of the PFSP or the Contracting Government’s testing of the port facility security organisation identifies failings in the organisation or questions the continuing relevance of significant elements of the approved PFSP;

.3 following security incidents or threats thereof involving the port facility; and

.4 following changes in ownership or operational control ofthe port facility.

16.60 The PFSO can recommend appropriate amendments to the approved plan follow‐ ing any review of the plan. Amendments to the PFSP relating to‐>

.1 proposed changes which could fundamentally alter the approach adopted to maintaining the security of the port facility; and

.2 the removal, alteration or replacement of permanent barriers, security and surveillance equipment and systems, etc., previously considered essential in maintaining the security of the port facility,

should be submitted to the Contracting Government that approved the original PFSP for their consideration and approval. Such approval can be given by, or on behalf of, the Contracting Government with, or without, amendments to the proposed changes. On approval of the PFSP, the Contracting Government should indicate which procedural or physical alterations have to be submitted to it for approval.

Approval of port facility security plans

16.61 PFSPs have to be approved by the relevant Contracting Government, which should establish appropriate procedures to provide for−

.1 the submission of PFSPs to them;

.2 the consideration of PFSPs;

.3 the approval of PFSPs, with or without amendments;

.4 consideration of amendments submitted after approval; and

.5 procedures for inspecting or auditing the continuing relevance of the approved PFSP.

At all stages, steps should be taken to ensure that the contents of the PFSP remain confidential.

Statement of Compliance of a Port Facility

16.62 The Contracting Government within whose territory a port facility is located may issue an appropriate Statement of Compliance of a Port Facility (SoCPF) indicating‐

.1 the port facility;

.2 that the port facility complies with the provisions of Chapter XI‐2 and Part A of the Code;

.3 the period of validity of the SoCPF, which should be specified by the Contract‐ ing Governments but should not exceed five years; and

.4 the subsequent verification arrangements established by the Contracting Gov‐ ernment and a confirmation when these are carried out.

16.63 The Statement of Compliance of a Port Facility should be in the form set out in the appendix to this Part of the Code. If the language used is not Spanish, French or English, the Contracting Government, if it considers it appropriate, may also include a translation into one of these languages.

17. PORT FACILITY SECURITY OFFICER

General

17.1 In those exceptional instances where the ship security officer has questions about the validity of identification documents of those seeking to board the ship for official pur‐ poses, the port facility security officer should assist.

17.2 The port facility security officer should not be responsible for routine confirmation of the identity of those seeking to board the ship.

In addition, other relevant guidance is provided under sections 15, 16 and 18.

18. TRAINING, DRILLS AND EXERCISES ON PORT FACILITY SECURJTY

Training

18.1 The port facility security officer should have knowledge and receive training, in some or all of the following, as appropriate−

.1 security administration;

.2 relevant international conventions, codes and recommendations;

.3 relevant Government legislation and regulations;

.4 responsibilities and functions of other security organisations;

.5 methodology of port facility security assessment;

.6 methods of ship and port facility security surveys and inspections;

.7 ship and port operations and conditions;

.8 ship and port facility security measures;

.9 emergency preparedness and response and contingency planning;

.10 instruction techniques for security training and education, including security measures and procedures;

.11 handling sensitive security‐related information and security‐related communications;

.12 knowledge of current security threats and patterns;

.13 recognition and detection of weapons, dangerous substances and devices;

.14 recognition, on a non‐discriminatory basis, of characteristics and behavioural patterns of persons who are likely to threaten the security;

.15 techniques used to circumvent security measures;

.16 security equipment and systems, and their operational limitations;

.17 methods of conducting audits, inspection, control and monitoring;

.18 methods of physical searches and non‐intrusive inspections;

.19 security drills and exercises, including drills and exercises with ships; and

.20 assessment of security drills and exercises.

18.2 Port facility personnel having specific security duties should have knowledge and receive training in some or all of the following, as appropriate−

.1 knowledge of current security threats and patterns;

.2 recognition and detection of weapons, dangerous substances and devices;

.3 recognition of characteristics and behavioural patterns of persons who are likely to threaten security;

.4 techniques used to circumvent security measures;

.5 crowd management and control techniques;

.6 security‐related communications;

.7 operations of security equipment and systems;

.8 testing, calibration and maintenance of security equipment and systems;

.9 inspection, control, and monitoring techniques; and

.10 methods of physical searches of persons, personal effects, baggage, cargo, and ship’s stores.

18.3 All other port facility personnel should have knowledge of and be familiar with relevant provisions of the port facility security plan in some or all of the following, as appropriate−

.1 the meaning and the consequential requirements of the different security levels;

.2 recognition and detection of weapons, dangerous substances and devices;

.3 recognition of characteristics and behavioural patterns of persons who are likely to threaten the security; and

.4 techniques used to circumvent security measures.

Drills and exercises

18.4 The objective of drills and exercises is to ensure that port facility personnel are pro‐ ficient in all assigned security duties, at all security levels, and to identify any security‐related deficiencies which need to be addressed.

18.5 To ensure the effective implementation of the provisions of the port facility secu‐ rity plan, drills should be conducted at least every three months unless the specific circum‐

stances dictate otherwise. These drills should test individual elements of the plan such as those security threats listed in paragraph 15.11.

18.6 Various types of exercises, which may include participation of port facility security officers, in conjunction with relevant authorities of Contracting Governments, company secu‐ rity officers, or ship security officers, if available, should be carried out at least once each calendar year with no more than 18 months

between the exercises. Requests for the participa‐

tion of company security officers or ship security officers in joint exercises should be made, bearing in mind the security and work implications for the ship. These exercises should test

communication, co‐ordination, resource availability and response. These exercises may be‐

.1 full‐scale or live;

.2 tabletop simulation or seminar; or

.3 combined with other exercises held, such as emergency response or other State authority exercises.

19. VERIFICATION AND CERTIFICATION FOR SHIPS

No additional guidance.

APPENDIX TO PART B

APPENDIX 1

Form of the Declaration of Security between a ship and a port facility’

DECLARATION OF SECURITY

Name of ship:

Port of registry:

IMO Number:

Name of port facility:

This Declaration of Security is valid from ……. until ………., for the following activities:

………………………………………………………………………..

(list the activities with relevant details)

under the following security levels

Security level(s) for the ship:

Security level(s) for the port facility:

The port facility and ship agree to the following security measures and responsibilities to ensure compliance with the requirements of Part A of the International Code for the Security of Ships and of Port Facilities.

1. This form of Declaration of Security is for use between a ship and a port facility. If the Declaration of Se‐

curity is to cover two ships, this model should be appropriately modified.

APPENDIX 1−continued

Activity			The port facility:	The ship:
Ensuring the performance of allsecurity duties
Monitoring restricted areas to ensurethat only
authorised personnel have access
Controlling access to the portfacility
Controlling access to theship
Monitoring of the port facility,including berth‐
ing areas and areas surroundingthe ship

Monitoring of the ship, includingberthing areas
and areas surrounding the ship
Handling of cargo
Delivery of ship’s stores
Handling unaccompanied baggage
Controlling theembarkation	ofpersons	and
their effects
Ensuring that security communicationis readily
available between the ship andthe port
facility

The signatories to this agreement certify that security measures and arrangements for both the port facility and the ship during the specified activities meet the provisions of Chapter XI‐2 and Part A of the Code that will be implemented in accordance with the provisions already stipulated in their approved plan or the specific arrangements agreed to and set out in the attached annex.

Dated at ………………………………………… on the ……………………………………………. .

Signed for and on behalf of

the port facility:

(Signature of Port Facility Security Officer)

the ship:

(Signature of Master or Ship Security Officer)

Name: Title:

Name and title of person who signed Name:

Title:

Contact details

(to be completed as appropriate)

(indicate the telephone numbers or the radio channels or frequencies to be used)

for the port facility:

Port facility

Port facility security officer

for the ship:

Master

Ship security officer Company

Company security officer

(Official seal)

APPENDIX 2

Form of a Statement of Compliance of a Fort Facility

STATEMENT OF COMPLIANCE OF A PORT FACILITY

(State)

Statement Number ………………………….

issued under the provisions of Part B of the

INTERNATIONAL CODE FOR THE SECURITY OF SHIPS AND OF PORT FACILITIES (ISPS CODE)

The Government of …………………………………………………………………………………… .

(name of the State)

Name of the port facility: ………………………………………………………………………….. .

Address of to port facility: …………………………………………………………………………. .

THIS IS TO CERTIFY that the compliance of this port facility with the provisions of Chapter XI‐2 and Part A of the International Code for the Security of Ships and of Port Facilities (ISPS Code) has been verified and that this port facility operates in accordance with the approved port facility

security plan. This plan has been approved for the following <specify the types of operations, types of ship or acti vities or other relevant information> (delete as appropriate):

Passenger ship

Passenger high‐speed craft Cargo high‐speed craft Bulk carrier

Oil tanker Chemical tanker

Gas carrier

Mobile offshore drilling units

Cargo ships other than those referred to above

This Statement of Compliance is valid until ………………………………………………….. , subject to verifications (as indicated overleaf)

Issued at ………………………………………………………………………………………………….. .

(Place of issue of the statement)

Date of issue ………………………………… .

(Signature of the duly authorised official issuing the document)

(Seal or stamp of issuing authority, as appropriate)

lNTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA (RATlFICA TlON AND ENFORCEMENT) ACT

SUBSIDIARY LEGISLATION

No Subsidiary Legislation